Whirlpool MAX 25 Benutzerhandbuch

2

INSTALLATION

PRIOR TO CONNECTING

Check that the voltage on the rating plate 
corresponds to the voltage in your home.

Place the oven on a stable, even 
surface that is strong enough to 
hold the oven and the food 
utensils you put in it. Use 
care when handling.

Position the oven at a distance from other 
heating sources. The cooling air, which is 
taken in by the oven, must not exceed 35°C 
temperature. For suffi

  cient ventilation there 

must be a space of at least 8-cm above the 
oven. Ensure that the space underneath, 
above and around the oven is empty to allow 
for proper airfl ow. The oven can operate in an 
ambient temperature ranging from +5°C to 
+35°C.

Ensure that the appliance is not damaged. 
Check that the oven door closes fi rmly against 
the door support and that the internal door 
seal is not damaged. Empty the oven and clean 
the interior with a soft, damp cloth.

AFTER CONNECTING
The oven can be operated only if the oven 
door is fi rmly closed.

The earthing of this appliance is compulsory. 
The manufacturer will accept no responsibility 
for injury to persons, animals or damage to 
objects arising from the non-observance of this 
requirement.

Do not operate this appliance if it has 
a damaged mains cord or plug, if it is not 
working properly, or if it has been damaged 
or dropped. Do not immerse the mains cord 
or plug in water. Keep the cord away from hot 
surfaces. Electrical shock, fi re or other hazards 
may result.

Do not remove the microwave inlet 
protection plates located on the side of the 
oven cavity wall. They prevent grease & food 
particles from entering the microwave inlet 
channels.

Poor television reception 
and radio interference 
may result if the oven 
is located close to a TV, 
radio or aerial.