Hotpoint DF56 Benutzerhandbuch

If the appliance is not going to be used for
some time carry out the following:
● Run the pre wash programme, twice in 

succession.

● Switch of at the electrical socket and 

unplug.

● Turn off the water supply tap,

disconnect the intake hose and allow to 
drain.

● Fill the rinse aid dispenser.
● Leave the door open, to prevent any 

unpleasant odours inside the 
dishwasher.

Before using the dishwasher after a long
break, plug in and switch on at the electrical
socket. Reconnect the intake hose and turn
on the water supply tap. Check there are no
deposits or rust inside the water pipe, if
there are allow water to run from the water
supply tap for a few minutes.

When disconnecting the appliance it is
important that tasks are carried out in the
correct sequence:
-

Switch off at the mains and remove the 
plug from the socket.

-

Turn off the water supply.

-

Disconnect drain and water intake hose.

-

Pull out the appliance, carefully,
withdrawing hoses at the same time.

Drain water from the dishwasher. Secure all
loose parts. Only transport in an upright
position.
-

If not kept upright during transport,
any water remaining inside, may seep 
into the control module and cause 
subsequent errors with programme 
functions.

CE marking certifies that this appliance
conforms to the following EEC directives:

22