Hotpoint HDA2000 Benutzerhandbuch

Seite von 32
Energy Options
HI TEMP Provides extra heat for best performance. It is used
WASH ON/ best with heavily-soiled dishes.
HI TEMP WASH
HI TEMP Turns 
HI TEMP WASH 
off.
WASH OFF
HEATED DRY/ Turns the heating element on for fast drying. This 
HEATED DRY ON option will extend the time of your wash cycle.
HEATED DRY OFF Turns 
HEATED DRY 
off
.
Dishes air dry naturally 
and energy is saved.
ENERGY SAVER Turns all options off.
Customer Ser
vice
Tr
oubleshooting T
ips
Operating Instr
uctions
Safety Infor
mation
Control Settings
Cycles
POTS & PANS/ For heavily soiled dishes or cookware with dried-on 
HEAVY WASH or baked-on soils. Everyday dishes may be included. 
This cycle will not remove burned-on foods.
NORMAL WASH For loads of everyday dishes, glasses and cookware 
with medium soils. 
NOTE:
Many dishes have lighter
soil than normal. Choosing a cycle other than 
NORMAL WASH 
will save energy and water.
SHORT WASH For quickly washing loads of everyday dishes with 
medium soils that have not dried on, such as loads 
consisting mostly of glasses.
LIGHT WASH/ For dishes with light soils. 
WATER SAVER
RINSE & HOLD For rinsing partial loads that will be washed later. 
Do not use detergent.
PLATE WARMER For warming clean dishes and serving plates. This 
cycle will take approximately 32 minutes.
Make sure the Dial is at the OFF position.
1
2
Start
Slowly turn the Dial to the START or ON position. Don’t
turn it past the START or ON position, or you could
accidentally miss a rinse. There is a time delay between
start-up and water fill so you will not hear any wash
action right away. 
Latch the door.
3
9