Ariston LFT M16 Benutzerhandbuch

After installing the dishwasher, open the door and stick the 
adhesive transparent strip under the wooden shelf in order 
to protect it from any condensation which may form.

After the appliance has been installed, immediately before 
running the first wash cycle, completely fill the salt dispenser 
with  water  and  add  only  then  approximately  1  kg  of  salt

(see chapter entitled Rinse aid and refined salt)

. The water 

may overflow: this is normal and is not a cause for concern. 
Select the water hardness value 

(see chapter entitled Rinse

aid and refined salt).

 - After the salt has been poured into 

the machine, the LOW SALT indicator light

*

 switches off.

If the salt container is not filled, the water softener and 

the heating element may be damaged as a result.

width 59.5 cm

height 82 cm

depth 57 cm

14 standard place-settings

Water supply pressure 0,05 ÷ 1MPa (0.5 ÷ 10 bar)

7,25 – 145 psi

See appliance data plate

See appliance data plate

See appliance data plate
This dishwasher conforms 

to the following European 

Community Directives: 

-2006/95/EC (Low Voltage) 

-2004/108/EC (Electromagnetic 

Compatibility) 

-2009/125/EC (Comm. Reg. 

1016/2010) (Ecodesign)

-97/17/EC (Labelling)

-2012/19/EC (WEEE)

The machine has a buzzer/set of tones (depending on the 
dishwasher model) to inform the user that a command has 
been implemented: power on, cycle end etc. 

The symbols/indicator lights/LEDs on the control panel/
display may vary in colour and may have a flashing or fixed 
light (depending on the dishwasher model).

* 

Only available in selected models.