Beko RDM 6106 Benutzerhandbuch

EN

10

Should the light fail to work switch 
off at the socket outlet and pull out 
the mains plug. Follow the below 
instructions to check if the light bulb 
has worked itself loose.

If the light still fails to work obtain a 
replacement E14 screw cap type 
15 Watt (Max) bulb from your local 
electrical store and then fit it as 
follows:
1. Switch off at the socket outlet and 

pull out the mains plug. You may find 
it useful to remove shelves for easy 
access.
2. Remove the light diffuser cover as 

shown in figure (a-b).

If your refrigerator is unbalanced;
You can balance your refrigerator by 
turning the front legs as shown in the 
illustration below. The corner where 
the leg exists is lowered when you turn 
it in the direction of black arrow and 
raised when you turn in the opposite 
direction. Taking help from someone to 
slightly lift the refrigerator will facilitate 
this process.

3. Replace the burnt-out light bulb.

4. Reassemble the light diffuser cover 

as shown in figure (c).
   “Push firmly to ensure cover is fitted 
properly.”
5. Carefully dispose of the burnt-out 

light bulb immediately.
“Replacement light bulb can easily be 
obtained from a good local electrical or 
DIY store.”