Homesmart Appliance SRS-LYNC-XL Benutzerhandbuch
CHAPTER 1
WELCOME
WELCOME
5
smarttech.com/kb/170450
Camera
The high definition camera automatically captures room video during meetings.
The high definition camera automatically captures room video during meetings.
Users can temporarily stop the video or shutter the camera for privacy purposes.
In most meeting rooms, digital pan, tilt and zoom (DPTZ) and the camera’s 109° field
of view ensure all meeting participants are captured regardless of where they are in the meeting
room.
The camera is installed on the top of the interactive flat panel in rooms with one interactive flat
panel or between the interactive flat panels in rooms with two interactive flat panels.
Table microphones and audio processor
The table microphones automatically capture audio during meetings. Users can
The table microphones automatically capture audio during meetings. Users can
temporarily mute the microphones for privacy purposes.
Your room system comes with two table microphones. You can purchase
additional table microphones (see
page).
Speakers
The speakers transmit audio from remote participants during a meeting. The room
The speakers transmit audio from remote participants during a meeting. The room
system’s audio-processing features eliminate echos and in-room audio feedback.
The speakers are installed on either side of the interactive flat panels.
Video connection harness and SMART Room System USB Bridge
The video connection harness and the SMART Room System USB Bridge enable users to connect
The video connection harness and the SMART Room System USB Bridge enable users to connect
their laptops or a room computer to the room system.
When users connect the video connection harness’s HDMI cable or VGA cable to a computer, the
computer’s video output appears on an interactive flat panel and is shared with remote
participants. If users also connect the SMART Room System USB Bridge to the computer, they can
interact with the computer by touching the interactive flat panel’s surface.
The video connection harness’s and SMART Room System USB Bridge’s connectors are typically
located on the meeting room table.