Amana 8111P446-60 Benutzerhandbuch

• To prevent staining or discoloration,

clean appliance after each use.

• If a part is removed, be sure it is correctly

replaced.

Removable Burner Caps
❚ Allow burner to cool. Remove burner cap

and wash in soapy water with a plastic
scouring pad. For stubborn soils, clean
with a soap-filled, nonabrasive pad or
Cooktop Cleaning Creme (Part
#20000001)** and a sponge.

❚ Do not clean in dishwasher or self-clean-

ing oven.

Sealed Gas Burner
❚ Clean frequently. Allow burner to cool.

Clean with soap and plastic scouring pad.
For stubborn soils, clean with a soap-filled,
nonabrasive pad.

❚ Be careful not to get water into the center

of the burner.

❚ Use care when cleaning the ignitor. If the

ignitor is wet or damaged the surface
burner will not light.

❚ To ensure even cooking performance, keep

burner ports free of food soils/debris.

❚ Wash grates with warm, soapy water and

a nonabrasive, plastic scrubbing pad. For
stubborn soils, clean with a soap-filled,
nonabrasive pad or Cooktop Cleaning
Creme (Part #20000001)** and a sponge.
If soil remains, reapply Cooktop Cleaning
Creme, cover with a damp paper towel

and soak for 30 minutes. Scrub again,
rinse and dry.

❚ Do not clean in dishwasher or self-clean-

ing oven.

❚ Remove knobs in the OFF position by

pulling up.

❚ Wash, rinse and dry. Do not use abrasive

cleaning agents as they may scratch the
finish.

❚ Turn on each burner to be sure the knobs

have been correctly replaced.

Porcelain enamel is glass fused on metal and
may crack or chip with misuse. It is acid
resistant, not acid proof. All spillovers, espe-
cially acidic or sugary spillovers, should be
wiped up immediately with a dry cloth.
❚ When cool, wash with soapy water, rinse

and dry.

❚ Never wipe off a warm or hot surface with a

damp cloth. This may cause cracking or
chipping.

❚ Never use oven cleaners, abrasive or caus-

tic cleaning agents on exterior finish of
cooktop.

❚

❚

❚ Daily Cleaning/Light Soil ––  Wipe with

one of the following - soapy water, white
vinegar/water solution, Formula 409 Glass
and Surface Cleaner* or a similar glass
cleaner - using a sponge or soft cloth. Rinse
and dry. To polish and help prevent finger-
prints, follow with Stainless Steel Magic
Spray (Part No. 20000008)**.

❚ Moderate/Heavy Soil –– Wipe with one of

the following - Bon Ami*, Smart Cleanser*,
or Soft Scrub* - using a damp sponge or soft
cloth. Rinse and dry. Stubborn soils may be
removed with a damp Scotch-Brite* pad;
rub evenly with the grain. Rinse and dry. To

*   Brand names are registered trademarks of the respective manufacturers.
** To order call 1-800-843-0304, USA; 1-866-587-2002, Canada.

restore luster and remove streaks, follow with
Stainless Steel Magic Spray.

❚ Discoloration –– Using a damp sponge or

soft cloth, wipe with Cameo Stainless Steel
Cleaner*. Rinse immediately and dry. To
remove streaks and restore luster, follow with
Stainless Steel Magic Spray.

❚ Check to be sure plug is securely inserted

into receptacle.

❚ Check or re-set circuit breaker.  Check or

replace fuse.

❚ Check power supply.
❚ Check to be sure burner is correctly rated for

your kind of gas.

❚ Check to be sure burner ports or ignition

ports are not clogged.

❚ Check to be sure ignitor is dry and clicking.

Burner will not light if ignitor is damaged,
soiled or wet. If ignitor doesn’t click, turn
control knob OFF.

❚ Check to be sure burner cap is correctly

seated on the burner base.

❚ Check that the gas is turned on.

❚ Check to be sure a pan is sitting on the grate

above.

❚ Contact an authorized Amana servicer.

❚ Burner ports may be clogged.
❚ Flame may need to be adjusted. Contact an

authorized Amana servicer.

❚ Contact an authorized Amana servicer.
❚ Some yellow tips on the flame are accept-

able when using LP gas.

6