Blomberg CTE 30400 Handbuch
![Blomberg](https://files.manualsbrain.com/attachments/46ee997656957c3ff78af69e1673faf5eea7e7cd/common/fit/150/50/c3153d9bfd3708d06425d750f7c231b897b0ff3e3d8f9ceb4433969205b2/brand_logo.png)
ENGLISH
Use & Care Manual
12
The heater works at full power (level 9, always on) for
10 minutes. After these 10 minutes the heater returns
to the selected power level.
10 minutes. After these 10 minutes the heater returns
to the selected power level.
This option is available for all the cooking zones, both
standard, both special ones (multiple zones or bridge).
standard, both special ones (multiple zones or bridge).
*&+
The key lock function is activated or deactivated holding
^@;=>Q&" ` ^ &
%^&" &; %^@;=>Q&"
itself is always enabled.
^@;=>Q&" ` ^ &
%^&" &; %^@;=>Q&"
itself is always enabled.
The keys are automatically locked at start-up.
The locking function can be activated regardless of the
heaters condition (working or not). The key lock function
& ^&" ^@;Q ^
@;*<;Q&" ^
heaters condition (working or not). The key lock function
& ^&" ^@;Q ^
@;*<;Q&" ^
"
!
It works as a minute minder and it doesn’t stop any
heating element.
heating element.
The timer is available in some models only. It can be set
independently from the heating element, even if there
aren’t any working zones. If the cooktop is not working,
^ { ^ @;*<;Q &" J "
mode, with all displays showing “0”.
independently from the heating element, even if there
aren’t any working zones. If the cooktop is not working,
^ { ^ @;*<;Q &" J "
mode, with all displays showing “0”.
1
2
3
Figure. 10
^@JQ
@XQ&"
^^
starts from “00” or “45” respectively on the timer display
(ref.1). Hold the key in order to fasten the increase/
decrease speed. The maximum value is “99”.
starts from “00” or “45” respectively on the timer display
(ref.1). Hold the key in order to fasten the increase/
decrease speed. The maximum value is “99”.
The timer led (ref.2) indicates whether the timer is
running.
running.
The dot in the lower right corner of the display (ref.3) is
j ^^^^
change its value. After 5 seconds since the last touch
j ^^^^
change its value. After 5 seconds since the last touch
the new value is accepted and the dot disappears.
{ ^ ^
correctly.
{ ^ ^
correctly.
^%^
@JQ&"^
^ ^ @JQ @XQ "
order to reset the value to “00” rapidly.
^ ^ @JQ @XQ "
order to reset the value to “00” rapidly.
When the timer value elapses:
\
" ]
^^
beeps followed by a long interval are repeated for 1
minute.
minute.
\ ^
^
j
^
\ ^ j ^
\ ^ j ^
j
^
{
\
^@JQ
@XQ
^.