KitchenAid KGCU484 Benutzerhandbuch

On some models, do not remove seals under knobs.

NOTE: When replacing knobs after cleaning either the surface 
burner controls or the grill module control, make sure the knobs 
are replaced to the correct location. For example, the knobs for 
the surface burner controls will read “LITE,” while the knob for 
the grill will read “LITE/HI.”

■

Soap and water or dishwasher:

Pull knobs straight away from control panel to remove.

To avoid damage to the control panel, do not use abrasive 
cleaners, steel-wool pads, gritty washcloths or abrasive paper 
towels. 

■

Soap and water.

Wash, rinse and dry with a soft cloth.

■

Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

For more information, see “Grill” section.

To avoid damage to the grill, do not use oven cleaners, metal 
brushes, abrasive scouring pads or other scrubbers made to 
clean outdoor grills.

Do not clean grill grate in dishwasher.

Do not clean in a self-cleaning oven.

■

Clean the grill grate shortly after cooking is completed and 
the burner has been turned off.

■

While still warm, use a soft bristle barbecue brush to scrub 
the grill grate. Oven mitts may be worn while cleaning.

■

For thorough cleaning of the grill grate, soak in warm, soapy 
water for 30 minutes. After soaking, scrub with nonabrasive 
pad.

■

Soak in warm, soapy water to loosen soil. After soaking, 
scrub with a nonabrasive pad.

■

Oven cleaner.

Do not soak in water.

■

Soap and water or nonabrasive cleanser.

■

Damp cloth or nonabrasive pad.

Allow cooktop to cool completely before cleaning.

■

Soap and water or nonabrasive cleanser.

■

Damp cloth or nonabrasive pad.

■

Warm, soapy water.

■

Nonabrasive pad or sponge.

■

For heavy soil, soak paper towels in household cleanser and 
lay them on the soil for at least 30 minutes. After soaking, 
scrub with a nonabrasive pad.

Clean the griddle shortly after removing food and the griddle has 
cooled down.

■

Hot, soapy water and/or nylon scrub pad

■

After cleaning dry surface with a paper towel

Allow cooktop to cool completely before cleaning.

■

Warm, soapy water or nonabrasive cleanser.

■

Damp cloth or nonabrasive pad.

■

Dry completely before placing drip tray in position.

■

Has a household fuse blown, or has a circuit breaker 
tripped?
Replace the fuse or reset the circuit breaker. If the problem 
continues, call an electrician.

■

Is this the first time the surface burners have been used?    
Turn on any one of the surface burner knobs to release air 
from the gas lines.

■

Is the control knob set correctly?
Push in knob before turning to a setting.

■

Are the burner ports clogged?
On sealed burner models, see “Sealed Surface Burners” 
section.

■

Are the burner ports clogged? 
On sealed burner models, see “Sealed Surface Burners” 
section.

■

On models with caps, are the burner caps positioned 
properly?
See “Sealed Surface Burners” section.

■

Is propane gas being used?
The appliance may have been converted improperly.    
Contact a trained repair specialist.

■

Is the burner wet?
Let it dry.