Panasonic KY-B64CA Benutzerhandbuch

Available on the cooking zone with

1. Touch

and hold the main power key to turn on

the power.

2. Select the cooking zone with

3. Touch Autoboil key. The appliance beeps 5 times

when the water reaches boiling point and the

boiling temperature is maintained. After beeping

add ingredients and adjust the heating power with

the slider as required.

4. Touch and hold the key of the cooking zone or

set the power level to “0” to turn off.

Autoboil Mode

(KY-B64CG model only)

IH Cooking

NOTE

■

Cookware with a non-stick coating may affect the sensor

detection. After beeping, adjust the power level as required.

■

Timer can be used with Autoboil Mode. (See page 26 - 27).

■

Cooking Timer can be used with Autoboil Mode. (See page 26)

NOTE

Temperature ‘100’ will flash in the display until the

boiling temperature is reached. After the water is

boiled, the appliance automatically sets the power

level to “7”. Increase or decrease the power level as

required.

Autoboil Mode is developed for boiling water only.

To achieve the optimum performance, the following is

recommended.

■

Use a lid until boiling.

■

Use a minimum of 0.5 L of water.

In order to prevent water boiling over from the pan, the

following is recommended.

■

No more than 70% pan capacity should be used.

■

There should be a minimum gap of 30 mm

between the lid and the water surface.