Xerox 4760 Benutzerhandbuch
Xerox
®
DocuMate
®
4760
User’s Guide
155
If the Document size list does not include the document size for your scanning batch, click in one of the fields below
the document size list. Input the width of the document in the first field, then input the length in the second field.
You can only specify values within the scanner's minimum and maximum supported item size. Please refer to the
maintenance section of the scanner user's guide for this information.
the document size list. Input the width of the document in the first field, then input the length in the second field.
You can only specify values within the scanner's minimum and maximum supported item size. Please refer to the
maintenance section of the scanner user's guide for this information.
Long Document
Select Long document to enable support of paper sizes up to the scanner maximum. After you select this option
make sure you input the page length for your document in the custom input field, located below the Document size
selection list.
make sure you input the page length for your document in the custom input field, located below the Document size
selection list.
Note that some of the options in the scanner interface cannot be used when the page length will be greater than 14
or 17 inches (depending on the scanner model). When you select this option, incompatible options will either be
automatically disabled or the setting will simply be discarded while scanning. For instance, the option Detect
double feeds will usually be disabled when Long document is selected, even if the scanner supports DFD, as the
added page length will cause a false double feed.
or 17 inches (depending on the scanner model). When you select this option, incompatible options will either be
automatically disabled or the setting will simply be discarded while scanning. For instance, the option Detect
double feeds will usually be disabled when Long document is selected, even if the scanner supports DFD, as the
added page length will cause a false double feed.
Manual Feed
Select this option to enable a delay from when the last page is scanned and when the scanner stops the scan job.
This allows you to scan one page at a time without having to click Scan for each page you put in the scanner.
This allows you to scan one page at a time without having to click Scan for each page you put in the scanner.
To scan with manual feed mode:
1.
1.
Select Manual feed in the scanner’s interface.
2.
In the Timeout field, input the amount of time you want the scanner to wait from when the last page is
scanned and when the scanner stops scanning.
scanned and when the scanner stops scanning.
3.
Place a document in the scanner.
4.
Click Scan.
5.
The scanning progress dialogue on-screen will display a countdown indicating how much time you have to
place the next document in the scanner.
place the next document in the scanner.
6.
When you are done scanning all pages in your document, you can click on Abort to stop the timer or simply let
the timer run out.
the timer run out.
Detect Double Feeds
Detect double feeds is the scanner's ability to detect when two or more pages are fed through the scanner at the
same time. When this option is turned on, ultrasonic waves are aimed at the document to detect multiple pages by
the level at which the waves pass through the pages. The accuracy of this sensor depends on paper thickness and
whether or not creasing is in the original document.
same time. When this option is turned on, ultrasonic waves are aimed at the document to detect multiple pages by
the level at which the waves pass through the pages. The accuracy of this sensor depends on paper thickness and
whether or not creasing is in the original document.
This option is available in the interface only if the current scanner supports this feature.