Cal Flame Spa Wrap Benutzerhandbuch
2009 Spa Wraps
LTR20091032, Rev. A
Spa
Wra
Wra
p
Assemb
ly
www.calspas.com
5
Seam and Joint Finishing
After you have unpacked all of the pieces and have put them in place around your spa, you may wish to apply
grout and stucco to the seams to give your spa wrap a more “finished” appearance.
Note: When access is needed inside your spa, the seams will need to be split. When work inside the spa is
Note: When access is needed inside your spa, the seams will need to be split. When work inside the spa is
finished, the seams will need to be refinished, so plan accordingly.
Prepare and fill the gap or seam line with speed set.
1.
Using your fingertips, push and flatten out the speed set into the seam line.
2.
NOTE: Allow the speed set to dry before proceeding with the next step.
Using a small brush or hopper gun, apply stucco to the seam line.
3.
Mix grout with water in a container.
4.
Fill the tile seam line with grout using a small spatula or your finger.
5.
Clean the grout with a damp rag.
6.