Roland Vs-880 Benutzerhandbuch
7.
Rotate the TIME/VALUE dial. In this case, choose CV1.
CV (Convert)
CV1=Tap
➝
S.Tr:
Create a sync track from mark
points.
points.
CV2=Tap
➝
T.Map
: Create a tempo map from mark
points.
CV3=S.Tr
➝
T.Map:
Create a tempo map from the sync
track.
track.
CV4=Time
➝
S.Tr:
Automatically create a sync track.
8.
Press PARAMETER [
].
The display will indicate ÒSYS CV:Beat=Ó.
9.
Specify the number of beats in one measure. Rotate
the TIME/VALUE dial.
the TIME/VALUE dial.
10.
Press PARAMETER [
].
The display will indicate ÒSYS CV:Tap Beat=Ó.
11.
Specify the number of mark points in each measure.
Rotate the TIME/VALUE dial.
Rotate the TIME/VALUE dial.
12.
Press [YES].
A message will ask you to confirm that you wish to re-
create the sync track and tempo track.
create the sync track and tempo track.
13.
Press [YES] one (or two) more times.
The sync track will be created.
Generating the tempo map from the
sync track
A tempo map can be created from the sync track recorded
by the VS-880.
This is convenient when you wish to convert the synchro-
nization signal of the sync track on the VS-880.
by the VS-880.
This is convenient when you wish to convert the synchro-
nization signal of the sync track on the VS-880.
1.
Press [SYSTEM] several times until “SYS
Sync/Tempo?” appears.
Sync/Tempo?” appears.
2.
Press [YES].
3.
Press PARAMETER [
].
The display will indicate ÒSYS Syn:GenÓ.
4.
Rotate the TIME/VALUE dial. In this case, choose
MIDIClk.
MIDIClk.
Gen (Sync generator)
This selects the type of synchronization signal that will be
transmitted from the MIDI OUT connector. When using a
synchronization signal from the VS-880 to synchronize
external MIDI devices, set this to the desired type of syn-
chronization signal.
transmitted from the MIDI OUT connector. When using a
synchronization signal from the VS-880 to synchronize
external MIDI devices, set this to the desired type of syn-
chronization signal.
Off:
Synchronization signals will not be transmit-
ted.
ted.
MTC:
MIDI Time Code will be transmitted.
MIDIClk:
MIDI Clock will be transmitted.
SyncTr:
MIDI Clock data recorded on the sync track
will be transmitted.
will be transmitted.
5.
Press PARAMETER [
] several times to get the
“SYS Sync.Tr Cnv?” display.
6.
Press [YES].
7.
Rotate the TIME/VALUE dial. In this case, choose CV3.
CV (Convert)
CV1=Tap
➝
S.Tr:
Create a sync track from mark
points.
points.
CV2=Tap
➝
T.Map
: Create a tempo map from mark
points.
CV3=S.Tr
➝
T.Map:
Create a tempo map from the sync
track.
track.
CV4=Time
➝
S.Tr:
Automatically create a sync track.
8.
Press PARAMETER [
].
The display will indicate ÒSYS CV3:S.TrBeat=Ó.
9.
Specify the number of beats per measure in the syn-
chronization signal that is recorded in the sync track.
Rotate the TIME/VALUE dial.
chronization signal that is recorded in the sync track.
Rotate the TIME/VALUE dial.
10.
Press [YES].
A message will ask you to confirm that you wish to re-
create the tempo map.
create the tempo map.
11.
Press [YES] once again.
The tempo map will be created.
Creating the sync track automatically
You can automatically create a sync track by specifying the
start and end times of the song, and the number of mea-
sures that it contains. This is convenient when you already
know the length of the song, such as for commercials.
start and end times of the song, and the number of mea-
sures that it contains. This is convenient when you already
know the length of the song, such as for commercials.
1.
Press [SYSTEM] several times until “SYS
Sync/Tempo?” appears.
Sync/Tempo?” appears.
2.
Press [YES].
3.
Press PARAMETER [
].
The display will indicate ÒSYS Syn:GenÓ.
4.
Rotate the TIME/VALUE dial. In this case, choose
SyncTr.
SyncTr.
Gen (Sync generator)
This selects the type of synchronization signal that will be
transmitted from the MIDI OUT connector. When using a
synchronization signal from the VS-880 to synchronize
external MIDI devices, set this to the desired type of syn-
chronization signal.
transmitted from the MIDI OUT connector. When using a
synchronization signal from the VS-880 to synchronize
external MIDI devices, set this to the desired type of syn-
chronization signal.
Off:
Synchronization signals will not be transmit-
ted.
ted.
MTC:
MIDI Time Code will be transmitted.
MIDIClk:
MIDI Clock will be transmitted.
SyncTr:
MIDI Clock data recorded on the sync track
will be transmitted.
will be transmitted.
5.
Press PARAMETER [
] several times to get the
“SYS Sync.Tr Cnv?” display.
6.
Press [YES].
7.
Rotate the TIME/VALUE dial. In this case, choose CV4.
CV (Convert)
CV1=Tap
➝
S.Tr:
Create a sync track from mark
points.
points.
CV2=Tap
➝
T.Map
: Create a tempo map from mark
points.
CV3=S.Tr
➝
T.Map:
Create a tempo map from the sync
track.
track.
CV4=Time
➝
S.Tr:
Automatically create a sync track.
Chapter 1 Trying out the expanded functions
41
Chapter 1