Jenn-Air W10436037B Benutzerhandbuch

Gather the required tools and parts before starting installation. 
Read and follow the instructions provided with any tools listed 
here.

■

Vent grille

■

Pre-filter

■

A UL listed or CSA approved strain relief for 

⁷⁄₈" (2.2 cm) 

knockout.

■

A UL listed or CSA approved conduit connector for 

¹⁄₂" (1.3 cm) trade-size metal-clad conduit

■

UL listed wire connectors

■

Metal ducting

■

Jenn-Air

®

 wall cap

Jenn-Air

® 

6" (15.2 cm) Round Surface Wall Cap Damper

Order Part Number A406

Jenn-Air

®

 3¼" x 10" (8.3 x 25.4 cm) Surface Wall Cap Damper

Order Part Number A403

To order, see the “Assistance or Service” section of the Use 
and Care Guide.

■

Vent clamps

Check local codes. Check existing electrical supply. See 
“Electrical Requirements” section.

It is recommended that all electrical connections be made by a 
licensed, qualified electrical installer.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

■

Tape measure

■

Flat-blade screwdriver

■

Phillips head screwdriver

■

Drill

■

Level

■

6" socket extension

■

Marker or pencil

■

Pliers

■

¼" drill bit

■

Jigsaw

■

Ratchet with 

³⁄₈" socket