Hotpoint KSC 640 X S Benutzerhandbuch

PLEASE PHONE US TO REGISTER YOUR APPLIANCE  AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

400V 3-N ~

50/60 Hz

Three-phase 400

5. Secure the power supply cable by fastening the 
cable clamp screw, then put the cover back on.

If the appliance is being connected directly to the 
electricity mains an omnipolar switch must be installed 
with a minimum opening of 3 mm between contacts.

!

 The installer must ensure that the correct electrical 

connection has been made and that it is fully compliant 
with safety regulations.

Before connecting the appliance to the power supply, 
make sure that:

•  The appliance is earthed and the plug is compliant 

with the law.

•  The socket can withstand the maximum power of 

the appliance, which is indicated on the data plate 
located on the appliance itself.

•  The voltage falls within the range of values indicated 

on the data plate.

•  The socket is compatible with the plug of the 

appliance. If the socket is incompatible with the 
plug, ask an authorised technician to replace it. Do 
not use extension cords or multiple sockets.

!

 Once the appliance has been installed, the power 

supply cable and the electrical socket must be easily 
accessible.

!

 The cable must not be bent or compressed.

!

 The cable must be checked regularly and replaced 

by authorised technicians only.

!

 The manufacturer declines any liability should 

! Do not remove or replace the power supply cable 
for any reason. Its removal or replacement will void 
the warranty and the CE marking. INDESIT does not 
assume liability for accidents or damage arising from 
replacement/removal of the original power supply 
cable. Replacement can only be accepted when 
carried out by personnel authorised by INDESIT and 
using an original spare part.

U-bolt

connection support

Neutral

Earth

Phase

Phase

Phase