Dixon ZTR Benutzerhandbuch

•Located to the right and front of the operator.
•Controls the cutting height.
•Eighteen positions of adjustment
•Push foot lever forward, depress trigger and move lever

forward to lower deck.

•Push foot lever forward, depress trigger and pull lever

back to raise deck.

Note:  Always use high position for transport.

The parking brake is designed to hold
the  mower from moving and is not
intended for use in stopping the
mower while it is in  motion.  The
engine will stop if the parking brake is
engaged while the control levers are in
the drive position.

Engage parking brake
before starting engine.

The hand operated parking brake is located on  the left
hand side of the mower.

•To engage brake, pull lever up (to the rear).
•To release brake, move lever forward (down).

Note: Always set parking brake before dismounting.

Release parking brake before moving mower.