Lg Electronics LDG3036ST Benutzerhandbuch

2

INSTALLATION INSTRUCTIONS

Installation of this range must conform with local 

codes, or in the absence of local codes, with the 

National Fuel Gas Code, ANSI Z223.1/NFPA.54, 

latest edition. In Canada, installation must 

conform with the current Natural Gas Installation 

Code, CAN/CGAB149.1 or the current Propane 

Installation Code, CAN/CGA-B149.2, and with 

local codes where applicable. This range has been 

design-certified by CSA International according 

to ANSI Z21.1, latest edition and Canadian Gas 

Association according to CAN/CGA-1.1 latest 

edition.
As with any appliance using gas and generating 

heat, there are certain safety precautions you 

should follow. You will find these precautions in the 

lmportant Safety Information section in your User’s 

Guide. Read them carefully.

 – 

Save these instructions 

for local electrical inspector’s use.

– 

Observe all governing 

codes and ordinances.

Note to Installer: Leave these instructions with 

the appliance after installation is completed.
Note to Consumer: Keep the User’s Guide and 

Installation Instructions for future reference.
NOTE: This appliance must be properly 

grounded.
•  The electrical diagram is in an envelop attached 

to the back of the range.

•  Skill level – Installation of this appliance requires 

basic mechanical skills.

•  Proper installation is the responsibility of 

theinstaller.

•  Product failure due to improper installation is not 

covered under the Warranty.

• Remove all tape and packaging.
•  Make sure the burners are properly seated and 

level.

•  Take the accessory pack out of the oven and/or 

drawer.

•  Check to be sure that no range parts have come 

loose during shipping.