Crane Merchandising Systems 677 Benutzerhandbuch
HDC II Programming Guide
Check the Setup
July, 2003
52
6730018
VIEW CUP SIZES ASSIGNED TO SELECTIONS
1.
Press
, then press
until the display shows
0. - - C - - - G -.
This example shows that regular size cups are assigned to selections C & G.
NOTE
Press
to display the remaining selections:
0 X - - - 2 - - - -
NOTE
If you have only one cup size in your machine, you will not see
the next display.
2.
Press
. The display shows
1. ABC- - FGH. This example shows that
large size cups are assigned to selections A thru C and F thru H.
NOTE
Press
to display the remaining selections:
0 X - - - 2 - - - -
3.
CONTINUE.
PAYOUT COINS
1.
Press
. If a dumb mech was selected, the display shows
NDQ=123; if
an MDB mech was selected the display shows
PAY 123.
2.
Press
. A dumb mech pays out one Nickel; an MDB mech pays a
coin from tube 1. Press
. A dumb mech pays out one Dime; an
MDB mech pays a coin from tube 2. Press
. A dumb mech pays out
one Quarter; an MDB mech pays a coin from tube 3.
3.
To continuously pay out coins, hold down the appropriate key.
4.
CONTINUE.