Sears 665.1359 Benutzerhandbuch

Seite von 18
12
*If the incoming water temperature is less than the recommended 
temperature, the cycle will automatically compensate by adding 
time and heat as needed.
Canceling a Cycle
1. Press CANCEL/DRAIN. The Cancel/Drain light glows. 
2. The dishwasher starts a 2-minute drain (if needed). Let the 
dishwasher drain completely. The light turns off after 
2 minutes. The door must be closed for the dishwasher to 
drain.
To stop the drain
You can press CANCEL/DRAIN again to stop the drain. Be sure 
to drain the dishwasher before starting a new cycle.
To clear the indicators
Press CANCEL/DRAIN before starting the dishwasher to clear all 
options and cycles.
Changing a Cycle or Setting
During the first minute of a cycle
1. Select a new cycle and/or options.
2. Check the detergent dispensers. They must be filled properly 
for the new cycle.
3. The Start/Resume light will flash when the door is opened. 
Make sure the door is closed. 
4. Press START/RESUME.
After the first minute of a cycle
1. Press CANCEL/DRAIN. The Cancel/Drain light glows. Your 
dishwasher starts a 2-minute drain (if needed). Let the 
dishwasher drain completely. 
2. Check the detergent dispensers. They must be filled properly 
for the new cycle.
3. Make sure the door is closed. The Start/Resume light will 
flash.
4. Select a new cycle and/or options.
5. Press START/RESUME.
Adding Items During a Cycle
You can add an item anytime before the main wash starts. Open 
the door and check the detergent dispenser. If the cover is still 
closed, you can add items.
To add items
1. Open the door slightly to stop the cycle. Wait for the spraying 
action to stop before opening the door. The Start/Resume 
light will flash.
2. Open the door. If the detergent dispenser cover is still closed, 
add the item.
3. Close the door firmly until it latches. The Start/Resume light 
will flash.
4. Press START/RESUME.
IMPORTANT: If Lock On is selected, turn off the lock (see Lock 
On section in “Option Selections”), or the Start/Resume light will 
continue to flash.
Heavy Wash
Use this cycle for loads with heavy food soil.
Use both detergent dispenser sections.
Wash
Main
Wash
Rinse or 
Purge
Final 
Rinse
Dry
Approximate 
Time
Water 
Usage
(gal/L)
Purge
2 hrs*
6.9/26.1
Normal Wash
Use this cycle for loads with normal amounts of food soil. (The 
energy-usage label is based on this cycle.) 
 
Use covered detergent dispenser section.
Wash
Main
Wash
Rinse or 
Purge
Final 
Rinse
Dry
Approximate 
Time
Water 
Usage
(gal/L)
Purge
1.5 hrs*
4.6/17.4
Light Wash
Use this cycle for china and crystal. This cycle uses a light 
wash and gentle dry. During the heated dry, the heating 
element cycles on and off. 
Use covered detergent dispenser section.
Wash
Main
Wash
Rinse or 
Purge
Final 
Rinse
Dry
Approximate 
Time
Water 
Usage
(gal/L)
Purge
cycled
1.5 hrs*
4.8/18.2
Quick Rinse
Use this rinse cycle for rinsing dishes, glasses, and silverware 
that will not be washed right away. 
Do not use detergent with this cycle.
Wash
Main
Wash
Rinse or 
Purge
Final 
Rinse
Dry
Time
(min)
Water 
Usage
(gal/L)
Rinse
10
2.2/8.3