Smeg LSA643BPQ Benutzerhandbuch
User instructions
11
(2)
The cycle duration and power consumption may vary according to the water and room
temperatures, and the type and amount of dishes.
temperatures, and the type and amount of dishes.
The ULTRA CLEAN and ULTRA CLEAN QUICK programs terminate with an extra anti-bacteria
rinse that ensures a further reduction in the bacteria level.
rinse that ensures a further reduction in the bacteria level.
3.3 Washing programs
The dishwasher is equipped with a control panel and an INFORMATION
DISPLAY (10) from which it is possible to carry out all the power switch-
on, switch-off and programming operations.
DISPLAY (10) from which it is possible to carry out all the power switch-
on, switch-off and programming operations.
Before starting a washing program make sure that:
•
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
obstruction.
•
The dishwasher door is securely closed.
LIGHTING
Pressing the ON/OFF button (1) will start the dishwasher and will lit up
the dishwasher pilot light (8). After approximately 3 second from this
operation the DISPLAY (10) will be turned on with a visualization that will
depend upon the state of the dishwasher.
Pressing the ON/OFF button (1) will start the dishwasher and will lit up
the dishwasher pilot light (8). After approximately 3 second from this
operation the DISPLAY (10) will be turned on with a visualization that will
depend upon the state of the dishwasher.
PROGRAMMING
In this dishwasher model all the programming operations are possible
only with closed door. With open door, on the DISPLAY (10) will appear
the symbols -- and the PILOT LIGHT PROGRAMS (9) remains out.
In this dishwasher model all the programming operations are possible
only with closed door. With open door, on the DISPLAY (10) will appear
the symbols -- and the PILOT LIGHT PROGRAMS (9) remains out.