DeLonghi ECAM26455M Gebrauchsanleitung
17
Important!
RINSE WITH WATER ONLY
NO WASHING UP LIQUID - NO DISH WASHER
Clean the infuser without using washing up liquid as it
could be damaged.
could be damaged.
6. Use the brush (D2) to remove any coffee residues left in
the infuser housing, visible through the infuser door.
7. After cleaning, replace the infuser by sliding it onto the
internal support; then push the PUSH symbol fully in until
it clicks into place.
it clicks into place.
infuser support
Please note!
If the infuser is difficult to insert, before insertion, adapt it to
the right size by pressing the two levers shown in the figure.
the right size by pressing the two levers shown in the figure.
7. Once inserted, make sure the two red buttons have
snapped out.
PUSH
8. Close the infuser door.
9. Replace the water tank.
9. Replace the water tank.
cleaning the milk
container
Clean the milk container as
described below each time you
prepare milk:
1. Remove the lid.
2. Remove the milk spout
Clean the milk container as
described below each time you
prepare milk:
1. Remove the lid.
2. Remove the milk spout
and intake tube.
3. Turn the froth adjustment
dial to the “INSERT” position
(see figure) and pull it off
upwards.
(see figure) and pull it off
upwards.
4. Wash all the components
thoroughly with hot water
and mild washing-up
liquid.
and mild washing-up
liquid.
All
components
are
dishwasher
safe,
placing them in the
top basket of the
dishwasher.
top basket of the
dishwasher.
Make sure there are
no milk residues
in the hollow and
groove under the
dial (see figure alongside). If
necessary, scrape the groove
with a toothpick.
no milk residues
in the hollow and
groove under the
dial (see figure alongside). If
necessary, scrape the groove
with a toothpick.
5. Rinse the inside of the froth
adjustment dial under running
water (see figure)
water (see figure)
6. Check that the intake tube and
spout are not clogged with milk residues.
7. Replace the dial (lining up the arrow with the word
“INSERT”, the spout and the milk intake tube.
8. Place the lid back on the milk container.
cleaning the hot water/steam nozzle
Each time you prepare
milk, clean the nozzle
with a sponge to remove
milk residues from the
gaskets (see figure
alongside).
Each time you prepare
milk, clean the nozzle
with a sponge to remove
milk residues from the
gaskets (see figure
alongside).
Descale
Descale the machine
when the message “DESCALE” flashes on the display.
when the message “DESCALE” flashes on the display.
Important!
• Descaler contains acids which may irritate the skin and
eyes.
It is vital to respect the manufacturer’s safety warnings
given on the descaler pack and the warnings relating to
the procedure to follow in the event of contact with the
skin and eyes.
given on the descaler pack and the warnings relating to
the procedure to follow in the event of contact with the
skin and eyes.
Use De’Longhi descaler only.
Under no circumstances should you use sulphamic or acetic
based descalers. Their use invalidates the guarantee.
based descalers. Their use invalidates the guarantee.
Large lever
Small lever