DeLonghi ECAM45.760 Benutzerhandbuch

12

The appliance is set by default to make coffee with a standard 
taste. You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the 

 button (fig. 11) repea-

tedly until the required taste is displayed.

The appliance is set by default to make a standard quantity of 
coffee. To select the quantity of coffee, press the 

 

button (fig. 12) until the message corresponding to the required 
quantity of coffee is displayed:

MY COFFEE 

Programmable: 

from 

≃20 to ≃180

SHORT 

≃40

STANDARD 

≃60

LONG  

≃90

EXTRA LONG COFFEE 

≃120

The appliance is set by default to automatically deliver 30 ml of 
“MY COFFEE”. To modify this quantity, proceed as follows:
1.  Place a cup under the coffee spouts (fig. 13).
2.  Press the 

 button (fig. 12) until “MY COFFEE” is 

displayed.   

3.  Keep the 

 button (fig. 17) pressed until the message 

“1 MY COFFEE Program quantity” is displayed and coffee 
delivery begins. Release the button.

4.  As soon as the coffee in the cup reaches the required level, 

press the 

button (fig. 17) again. 

The quantity of coffee in the cup set has now been programmed.
The programmed quantity is doubled for the 

 button.

The coffee mill is set by default to prepare coffee correctly and 
should not require regulating initially.
However, if after making the first few coffees you find that the 
coffee is either too weak and with not enough ‘crema’ or delivery 
is too slow (a drop at a time) and the coffee is very strong, this 
can be corrected by adjusting the grinding adjustment dial (fig. 
14).

The grinding adjustment dial must only be turned when the 
coffee mill is in operation.

If the coffee is delivered too slowly or 
not at all, turn one click clockwise to-
wards “7”. 
For fuller bodied coffee with more 
‘crema’, turn one click anticlockwise to-
wards “1” (do not turn more than one 
click at a time otherwise the coffee could 

be delivered a drop at a time).  These adjustments will only be 
evident after at least 2 cups of coffee have been delivered. If 
this adjustment does not obtain the desired result, turn the dial 
another click. 

For hotter coffee, you should:
•  perform a rinse cycle, selecting the “Rinsing” function in 

the settings menu (page 10).

•  warm the cups by rinsing them with hot water (using the 

hot water function);

•  increase the coffee temperature in the settings menu  

(page 11).

Do not use caramelised or candied coffee beans as they could 
stick to the coffee mill and make it unusable. 

1.  Fill the container with coffee beans (fig. 15).
2.  Place under the coffee spouts:
 

- 1 cup, if you want to make 1 coffee (fig. 13);

 

- 2 cups if you want 2 coffees (fig. 16).

3.  Lower the spout as near as possible to the cups (fig. 16). 

This makes a creamier coffee. 

4.  Press the button corresponding to the number of coffees 

required  (1 cup  

 or 2 cups  

).  

5.  Preparation begins. The amount of coffee selected is di-

splayed together with a progress bar which gradually fills 
as preparation progresses. 

•  While the machine is making coffee, delivery can be inter-

rupted at any moment by pressing any button. 

•  At the end of delivery and within 3 seconds, press and hold 

one of the coffee buttons to increase the quantity of coffee 
in the cup  (

or  

) (fig. 17).

Once the coffee has been made, the appliance is ready to make 
the next drink.