Sterling 882 Benutzerhandbuch

This section describes the various components of the loading 
system.  The loading system is made up of the following 
components: 
 

•  Stainless steel vacuum receiver 

•  Tangential 1

1

2

” OD (about 38.1 mm OD) material 

inlet 

•  High flow blowback valve with electrical quick disconnect 

and accumulator 

•  Twin bag filter assembly with glazed polyester filter bags 
•  Receiver-mounted junction box with 8 feet (2.6 m) of cable 

to a field-mounted control box 

•  Material demand/level sensor 
•  High-performance centrifugal motor with electrical quick 

disconnect 

•  Sound enclosure 
•  9-foot (2.7 m) power cord 
•  Dual tube aluminum pickup wand with ten (10) feet (3 m) of 

grounded flexible vinyl hose and two (2) hose clamps 

•  Counter-weighted flapper assembly. 

 

This section will familiarize the reader with the components of the 
powder loading system.  After reading this section, the reader will 
be able to identify the individual common components of the 
loading system.