Dixon 965871802 Benutzerhandbuch
lUBRICATION
50
-Dixon
IMPORTANT INFORMATION
Used engine oil is a health hazard and must
Used engine oil is a health hazard and must
not be disposed of on the ground or in nature;
it should always be disposed of at a workshop
or appropriate disposal location.
Avoid skin contact; wash with soap and water
Avoid skin contact; wash with soap and water
in case of spills.
Engine Oil
Engine Oil Filter
Drain the engine oil in accordance with the work
•
description under the heading Engine Oil/Change
Engine Oil.
Remove the oil filter. If necessary, use a filter
Remove the oil filter. If necessary, use a filter
•
remover.
Wipe new, clean engine oil onto the seal for the
Wipe new, clean engine oil onto the seal for the
•
new filter.
Mount the filter by hand with +¾ turn.
Mount the filter by hand with +¾ turn.
•
Run the engine warm, then check that there are
•
no leaks around the oil filter seal.
Check the oil level in the engine, fill if necessary.
Check the oil level in the engine, fill if necessary.
•
The oil filter holds 0.1 qt (0.1 liters) of oil.
8011-734
Changing the oil filter
Deck Outer Spindle
lubricate using a grease gun, one zerk, each side 2-3
strokes. Use only good quality bearing grease.
8061-025
Deck outer spindle (with belt shield removed)
WARNING!
Engine oil can be very hot if it is
Engine oil can be very hot if it is
drained directly after stopping the
engine. Allow the engine to cool to a
safe temperature before draining.