Anetsberger Brothers MX-14E Benutzerhandbuch

8

Figure 3.  Typical Leg Installation

1. Move the fryer to its desired location.

!

2. Turn the screw-type leg adjustment ends as

necessary to level the fryer, until NO tipping,
rocking, or wobbling is evident.

3. Perform the Fryer Restraining Device

(Continued)

1. Flatten the shipping carton (after unpacking the

fryer and its parts and accessories) for surface
protection during caster installation.

2. Position the side of the fryer flat on the carton,

exposing the fryer bottom mounting brackets
for caster installation, as shown in Figure 4.

3. Mount locking casters on the front of the fryer

and fixed casters on the rear, by placing each
caster mounting plate flush against the mounting
 bracket on the fryer bottom.

4. Insert one mounting bolt through a flatwasher

(supplied) and the mounting bracket, then
through the caster mounting plate.

5. Screw a locking nut several turns onto the

mounting bolt.

6. Repeat steps 4 and 5 until all four mounting

bolts for a caster are in place with locking nuts.

7. Tighten the four bolts evenly and securely to

hold the caster mounting plate against the fryer
mounting bracket.