Topcom Twintalker 3800 Combi Pack 5411519008183 Benutzerhandbuch

4

TOPCOM TWINTALKER 3800

TOPCOM TWINTALKER 3800

•   In some countries it is prohibited to use your PMR while driving a vehicle. In this case leave the road before using 

the device.

•   Turn your unit OFF when on board an aircraft when instructed to do so. Any use of the unit must be in accordance 

with airline regulations or crew instructions.

•   Turn your unit OFF in any facilities where posted notices instruct you to do so. Hospitals or health care facilities 

may be using equipment that is sensitive to external RF energy.

•   Replacing or modifying the antenna may affect the PMR radio specifications and violate the CE regulations. 

Unauthorised antennas could also damage the radio.

•   Do not touch the antenna while transmitting, it could affect the range.
•   Remove the battery if the device is not going to be used for a long period.

•   To clean the unit, wipe with a soft cloth dampened with water. Don’t use a cleaner or solvents on the unit; they can 

damage the case and leak inside, causing permanent damage.

•   Battery contacts may be wiped with a dry lint-free cloth.
•   If the unit gets wet, turn it off and remove the batteries immediately. Dry the battery compartment with a soft cloth 

to minimize potential water damage. Leave the cover off the battery compartment overnight or until completely dry. 
Do not use the unit until completely dry.

Dispose of the unit and used batteries in an environment friendly manner.
Do not dispose of batteries in a normal household garbage.

To communicate between PMR devices they need to be set all on the same channel and within receiving range (up to 
max. 3 km in open field). Since these devices use free frequency bands (channels), all devices in operation share these 
channels(total 8 channels). Therefore, privacy is not garanteed. Anybody with a PMR set to your channel can overhear 
the conversation. If you want to communicate (transmitting a voice signal) you need to press the 

 button.

Once this button pressed, the device will go into transmit mode and you can speak into the microphone. All other PMR 
devices in range , on the same channel and in standby mode (not transmitting) will hear your message. You need to 
wait until the other party stops transmitting before you can reply to the message. At the end of each transmission the 
unit will send a beep. To reply, just press the 

 button and speak into the microphone.