Keating Of Chicago 3424 TS GAS Merkblatt
34×24 TS GAS
As continuous product improvement occurs, specifications may be changed without notice.
DESCRIPTION
The Keating Instant Recovery® 34×24 TS Fryer consists of a
frying vessel 34"×24" having a splash deck and a splash back
installed in a cabinet equipped with gas burners and an automatic
temperature control mechanism, all arranged and designed for the
proper frying of food.
The Keating Instant Recovery® 34×24 TS Fryer consists of a
frying vessel 34"×24" having a splash deck and a splash back
installed in a cabinet equipped with gas burners and an automatic
temperature control mechanism, all arranged and designed for the
proper frying of food.
SPECIFICATIONS
Frying Vessel:
Frying Vessel:
shall be constructed from 18 gauge stainless
steel, shall have a shortening capacity of 195 pounds, shall be
equipped with six 18 gauge horizontal heat transfer tubes
spaced above the bottom of the vessel so that the bottom is
unheated and the food particles collecting in this bottom zone
are unheated and therefore do not carbonize. The frying
vessel shall be polished to inhibit carbon build-up and
facilitate easy clean-up.
equipped with six 18 gauge horizontal heat transfer tubes
spaced above the bottom of the vessel so that the bottom is
unheated and the food particles collecting in this bottom zone
are unheated and therefore do not carbonize. The frying
vessel shall be polished to inhibit carbon build-up and
facilitate easy clean-up.
The heat transfer tubes shall be 3" wide
and 5" high. The bottom of the vessel shall slope toward the front
where it shall be equipped with two 1
where it shall be equipped with two 1
1
/
4
" Teflon core
1
/
4
turn, drain
valve, so arranged that the shortening can be drained into a
receiving vessel placed in front of the fryer.
receiving vessel placed in front of the fryer.
Splashdeck shall slope toward the shortening containing
vessel.
vessel.
The splash deck shall be made of 16 gauge 304
stainless steel.
Splashback
shall be made of 18 gauge 304 stainless steel, shall
completely cover the sides of the flue.
Cabinet:
shall be made of 18 gauge stainless steel. The
cabinet shall be rigid in construction and shall have four 8"
adjustable legs. Two doors made of 22 gauge 304 stainless
steel
adjustable legs. Two doors made of 22 gauge 304 stainless
steel
shall cover the front of the cabinet and shall extend from
the bottom of the fryer to the panel, and above the panel shall be
a canopy. Each door shall be one-half of the width of the
cabinet. No additional space is required for the doors to open a
full 90 degrees. A stainless steel flue deflector is provided for
installing onto the flue back.
a canopy. Each door shall be one-half of the width of the
cabinet. No additional space is required for the doors to open a
full 90 degrees. A stainless steel flue deflector is provided for
installing onto the flue back.
Heat Transfer Tubes
to be six, made of stainless steel
polished to a #7 mirror finish.
Thermostat shall be close range, hydraulic type and be accurate
to ±3°F from 300° to 375°F with stainless steel bulb.
Application of this thermostat is patented by Keating.
to ±3°F from 300° to 375°F with stainless steel bulb.
Application of this thermostat is patented by Keating.
Hi-Limit Control shall be manually resettable type with
stainless steel bulb.
stainless steel bulb.
100% Safety Shut Off shall be flame switch type with dual
combination control gas valve.
combination control gas valve.
Melt Cycle to be standard on “TS” fryers, allowing the safe
melting of solid shortening. Fryer is to be left in the Melt Cycle
mode until oil completely covers heat transfer tubes.
melting of solid shortening. Fryer is to be left in the Melt Cycle
mode until oil completely covers heat transfer tubes.
Indicating Lights & Switches. Power On Switch, power on light,
pilot switch, pilot on light, fry off melt switch.
pilot switch, pilot on light, fry off melt switch.
Standard Accessories to include
two timers (programmable for
three products each),
one pair split size 4 mesh baskets, one
triple size 4 mesh basket, grid screen over heat transfer tubes,
drain clean out rod and sample of Keating Klenzer and Sea
Powder.
drain clean out rod and sample of Keating Klenzer and Sea
Powder.
Gas Requirements to install are
3
/
4
" male NPT connection and 4"
water column pressures natural and 10" for LP gas at the fryer
burner manifold. Supply pressure to fryers must be 7" (natural
gas) and 11" (LP) water column.
burner manifold. Supply pressure to fryers must be 7" (natural
gas) and 11" (LP) water column.
Electrical Connections to be 120V 1 amp, supplied with cord
and 3 pronged plug.
and 3 pronged plug.
Special Order Options may include battery, common manifold,
rear drain, casters, covers, thermostat seals, portable filter,
central filter (CF34×24SE), Safe & Easy filter, security package.
rear drain, casters, covers, thermostat seals, portable filter,
central filter (CF34×24SE), Safe & Easy filter, security package.
INST
ANT RECO
VER
Y
®
FR
YER 34×24
TS
GAS
Printed in U.S.A.
34x24TSg2007
7/07
Oil
BTU
Ship
Model No. and Description
Capacity
Input
Height
Depth
Width
Wt.
34×24 TS Nat Gas
195 lbs.
201,000
46
1
/
2
"
42
1
/
2
"
35
3
/
8
"
435 lbs.
34×24 TS LP Gas
195 lbs.
198,000
46
1
/
2
"
42
1
/
2
"
35
3
/
8
"
435 lbs.
34×24 Safe & Easy
-
-
46
1
/
2
"
42
5
/
8
"
35
3
/
8
"
-
KEATING OF CHICAGO, INC.
Toll Free 1-800-KEATING
www.keatingofchicago.com
300
275
A L
OT C
2
5
0
35
0
D
T
R A
I B
T
HS
E
I F
I A L
3
7
5
325
MELT - FRY
POWER
POWER ON
PILOT ON
PILOT
T3
T2
SET
SET
T1
1-800-KEATING
T3
T2
SET
SET
T1
1-800-KEATING
GAS INLET
WITH NEMA 5-15 PLUG
6 FT. 3-WIRE CORD
FRYER POWER
GAS IN
3/4" NPT
12 1/2
8
42 1/2
46 1/2
35
38
9 5/8
35 3/8