Frymaster BKSDU Benutzerhandbuch

2 

manuals, and to stock a minimum amount of parts for Frymaster equipment.  A list of Factory 
Authorized Service Centers (FASCs) was included with this equipment when shipped from the 
factory.  Unless specifically indicated otherwise in this manual, failure to use qualified service 
personnel will void the Frymaster Warranty on this equipment. 
 
1.4  Shipping Damage Claim Procedure 
 
This equipment was carefully inspected and packed before leaving the factory.  The transportation 
company assumes full responsibility for safe delivery upon acceptance of the equipment for 
transport. 
 
1.5  What to Do If Your Equipment Arrives Damaged 
 
1.  File a claim for damages immediately, regardless of the extent of damages. 
 
2.  Inspect for and record all visible loss or damage and ensure that this information is noted on 

the freight bill or express receipt and is signed by the person making the delivery. 

 
3.  Concealed loss or damage that was unnoticed until the equipment was unpacked should be 

recorded and reported to the freight company or carrier immediately  upon discovery. A 
concealed damage claim must be submitted within 15 days of the date of delivery.  Ensure that 
the shipping container is retained for inspection. 

 

 

 

 

The Shortening Disposal Unit (SDU) is designed for the safe transportation of used shortening or 
cooking oil from the kitchen to a disposal container.  There are two sizes – the SDU 50 (holding up 
to 50 lbs./23 kg) and the SDU 90 (holding up to 90 lbs./41 kg) of shortening.  Both sizes are 
identical in construction and operation except for the volume of shortening that can be handled.  The 
units consist of a tank to receive waste shortening/oil from a fryer and a heavy-duty manual pump 
for transferring the shortening/oil to a disposal container.  Both models are equipped with 7" (178 
mm) wheels and foldable handles.  The pump is mounted at a convenient height that allows it to be 
operated from a standing position.  The height of the discharge pipe allows pumping directly into a 
standard 55-gallon drum. 
 
The BKSDU is equipped with a 120VAC or 240VAC tank heater to prevent solid shortening from 
solidifying prior to disposal.  The BKSDU is equipped with a receptacle that accepts a three-prong, 
grounded plug for protection against shock hazard.  The power cord should be plugged directly into 
a properly grounded, three-hole wall or floor receptacle.  Do not cut off, remove, or otherwise 
bypass the grounding prong on the power cord plug. CAUTION:  Risk of fire and electric shock. 
Replace only with manufacturer’s cord set, part number 8071224 for 120V or part number 
106-4697 for 240V.