Delfield 6100XL Merkblatt

Exterior: Top and bottom are constructed of 24-gauge 

galvanized steel.  Exterior sides are 0.032 aluminum.  Front 

housing is 22-gauge stainless steel.

Doors: Unit is provided with hinged solid front door(s).  Door 

exterior is constructed of 22-gauge stainless steel.  Interior 

door liner is ABS.  Doors are provided with locks, magnetic 

gaskets, self-closing, edgemount hinges; and quick grip long 

length door handle(s).  Doors are field reversible with no 

drilling required.

Interior: Liner is constructed of seamless, one piece ABS 

material with 15 molded shelf supports spaced 3.00” (7.6cm) 

apart.  Three epoxy coated wire shelves, rated at 250 lb. load 

capacity each, are provided per section.  Shelf supports are 

also capable of holding two 12” x 20” pans (by others) or one 

18” x 26” pan (by others) per level.  Liner comes with a limited 

lifetime warranty.

Units are completely insulated with a minimum of 2.00” 

(5.08cm) high density foamed in place polyurethane.

Interior is lighted by one 40-watt incandescent light (by 

others) on one and two door models, and two 40-watt 

incandescent lights (by others) on three door models.  Lights 

are located outside of the food zone.  Door activated switches 

control the lights.  

Refrigeration system: All components are mounted to 

the exterior cabinet ceiling, outside the food zone and are 

assembled as one piece and can be removed as one piece.  

Environmentally friendly R404A refrigerant is used.  System 

has the capability of maintaining between -5˚F and 0˚F in 

heavy use food service operations.  Refrigerant is metered 

using a highly responsive thermostatic expansion valve.  On 

demand, evaporator defrost is automatic using a temperature 

initiated/temperature terminated system with electric heaters.  

System is controlled using Delfield’s ACT-Advanced Control 

Technology electronic temperature control, which provides 

improved pull down times, reducing compressor cycling and 

longer compressor life with lower energy consumption.  

 Evaporator condensate is eliminated using an energy 

efficient hot gas system.  

Others: Unit is supplied standard with a 10’ cord and plug, 

attached.  4” diameter casters with an overall height of 5” 

are mounted on the unit from the factory on self-contained 

models ( 2&3 section units only).

Remote units are standard with legs.  Legs are constructed 

of painted metal and are 6” high with 1” adjustability to 

compensate for installation location factors.

Specifications

Standard Features

Options & 
Accessories

•

Stainless steel doors and front shroud

•

Aluminum sides

•

Seamless, Delrite® ABS interior liner

•

Top mounted refrigeration system

•

High performance Delflow refrigeration,
designed to maintain -5˚F to 0˚F

•

Ships with casters mounted from factory

 

(2&3 section units only)

•

Easy to adjust epoxy shelves (three per section)

•

Easy to read digital thermometer with visual
high/low temp alarm

•

10’ cord and plug attached

•

Edgemount door hinges

•

All doors are fully field rehingable

•

Environmentally friendly R404a refrigerant

•

One year parts and labor, 5 year compressor
warranty, limited lifetime liner warranty

•

Accepts 18” x 26” sheet pans

•

Self closing doors with stay open feature at
120˚

•

Ergonomically correct, easy grip door handles

• 6125XL-S

Single section full height doors

• 6151XL-S

Two section full height doors 

• 6176XL-S

Three section full height doors

• 6125XL-SR

Remote full height doors 

• 6151XL-SR

Remote full height doors 

• 6176XL-SR

Remote full height doors

• 6125XL-SH

Single section half height door 

• 6151XL-SH

Two section half height door 

• 6176XL-SH

Three section half height door

• 6125XL-SHR

Remote half height door 

• 6151XL-SHR

Remote half height door 

• 6176XL-SHR

Remote half height door

Models

6100XL

Solid Door Reach-in Freezer

6100XL: S

olid D

oor R

each-in F

reez
er

o 

Extra shelves

o 

Non standard hinging

o 

Legs in lieu of casters