Delfield SPF-52W Техническое Руководство

Project  __________________________

Item ____________________________

Quantity  _________________________

CSI Section 11400

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com

Approval _________________

Date ____________________

❑ 

SPF-42W 

42” length, freezer module, 34” height, 35” depth 

❑ 

SPF-52W 

52” length, freezer module, 34” height, 35” depth

❑ 

66” length, freezer module, 34” height, 35” depth

Exterior: Exterior body is constructed of 18-gauge 

stainless steel (stainless models) or 18-gauge 
galvanized with reinforced laminate facing. 14-gauge 
galvanized bottom.  All exterior side panels are 
reinforced with overlapping corners and are welded in 
place.  All insert cutouts are reinforced with 14-gauge 
galvanized channel supports.

Exterior top is constructed of 14-gauge stainless steel, 
welded, ground and polished into one integral unit.  
Top is fabricated with square exterior corners with fully 
hemmed nosing on overhanging sides.  Stainless steel 
fully retractable interlocks are installed on opposing 
corners and locks units into a complete serving system.

Interior: Freezer cold pan is 13” deep one-piece 

constructed stainless steel tank.  Unit is cold wall 
constructed.  The tank is separated from the top by a 
polycarbonate  thermal break and is fully insulated with 
foamed in place high-density polyurethane foam.  A 
stainless steel access panel is located in bottom of tank, 

allowing complete access to the evaporator coil and fan 
package.
On/Off switch is located on the operator side in a 
recessed panel with a hinged cover plate.
Freezer tank maintains 0˚ to -5˚ temperature with lids 
closed for storage.

Lid: Lids are constructed of stainless steel and are 

foamed with polyurethane insulation.  The lid thickness 
is 3/4”.  Lid handle shall be black, recessed ABS.  Lids 
are removable without the use of tools.  Lid locks are 
standard.

Stainless steel lid locking bar is standard.  Bar has 
locking handle at one end and mounts to clips, which 
are bolted to the top of the cabinet.  The locking bar 
extends the length of the unit.  Entire assembly can be 
removed during the serving period.

Electrical: Electrical connections shall be 120 volt, 60 

Hertz, single  phase.  Unit shall have a 9’ long electrical 

cord and NEMA 5-15 plug.  Cord is standard on the 
operator right side of equipment.  Double cord hook is 
located on the bottom of the unit.

Freezer:  Refrigeration system uses R404A refrigerant 

and has a self-contained 120 volt, 60 Hertz, single 
phase hermetically sealed condensing unit.  Unit is 
supplied with an expansion valve.

Casters: Unit is mounted on 5” (12.7cm) diameter 

swivel polyurethane casters with non-marking tires 
and plate brakes.  Casters are bolted directly to the 
14-gauge bottom of the base.  Overall height of caster 
assembly is 6.00” (15.2cm).

Styling: Units are standard with 18-gauge stainless 

steel exterior.  Laminate is an option available at no 
additional charge.  Decal packages and canopies are 
also available.

•  14-gauge stainless steel top standard
•  34” counter height, 35” depth
•  9’ long cord and plug are supplied standard
•  18-gauge stainless steel exterior standard
•  Electrical: 120 volt, 60 cycle, single phase
•  R404A refrigerant
•  Removable sliding lids (two per unit) standard
•   Standard on 5” diameter polyurethane swivel casters
•  Stainless steel fully retractable interlock provided as 

standard

•   Basket rack system is standard
•  A wide selection of laminate colors available at no 

additional charge

•   Laminate selection has 18-gauge galvanized base, 

16-gauge coved corner supports to protect laminate

•   Meets NSF2, UL and CEC standards
•  One-year parts and 90 day labor standard warranty.  

Additional warranties available

•  Holds baskets size, 13.25” x 26.13” x 2.5” or 
 

13.25” x 26.13” 4.75”

OPTIONS AND ACCESSORIES
❑ 

Single tier merchandiser (Unheated)

❑ 

Double tier merchandiser (Unheated)

❑ 

16”x35” stainless steel drop tray shelf

❑

  Cash shelf

❑

  Tray slides

 

• V-style

 

• Tubular bar

❑

  2” Wire basket (13.25”x26.13”x2.5”)

❑

  4” Wire basket (13.25”x26.13”x4.75”)

❑

  Decal package

❑

  Canopy

❑

  Counter protectors/food shields

❑

  Overshelves

❑

  Stainless steel legs