Delfield SSFN-S Merkblatt

Exterior: SS and SA models shall have corrosion resistant stainless 

steel exterior cabinet sides, front and shroud. SM models shall have 

corrosion resistant aluminum on exterior cabinet sides and will have 

stainless front and shroud. All units shall have the upper shroud 

hinged with a gas assist stay open feature to provide easy access to 

the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel 

(SS models) or heavy gauge aluminum (SA and SM models). Bottom 

and top surfaces shall be die stamped to provide radius corners and 

recessed floor. Three wire shelves are provided per section, SA/SS 

standard shelves are chrome plated, SM standard shelves are epoxy 

coated. Shelves rest on clips which are adjustable on 1” increments 

on stainless steel pilasters affixed to the cabinet interior. Pilasters are 

removable without tools for cleaning. Mounted to the interior ceiling, 

the interior incandescent light is controlled automatically through a 

switch mounted in the hinge assembly to protect against breakage. 

Door openings are protected with heavy gauge stainless steel 

breaker strips. An air duct shall be mounted to the ceiling assuring 

low velocity, even air movement throughout the cabinet interior. 
Doors: Exterior shall be corrosion resistant stainless steel. Interior 

liner shall be resilient high impact ABS material formed to protrude 

beyond the door gasket to protect the gasket from tearing.  Each 

door has two edge mount, self closing, cam lift style hinges. Doors 

can be removed from the cabinet without the use of tools. Metal 

door handle shall be recessed into the door for easy grip without 

impacting aisle space. Keyed door lock is mounted in the door next 

to the handle. Lock engages into a heavy duty strike mounted to 

the cabinet face. Door gaskets are magnetic and mount to the door 

snapping in place and are removable without tools.
Refrigeration system: All components are mounted to the exterior 

of the cabinet ceiling, outside the food zone and are assembled 

as one piece and can be removed as one piece. Environmentally 

friendly R404A refrigerant is used. The system has the capability 

of maintaining between -5ºF and 0ºF in heavy use food service 

operations. Refrigerant is metered using a highly responsive 

thermostatic expansion valve. System is controlled using Delfield’s 

ACT-Advanced Control Technology electronic temperature control, 

which provides improved pull down times, reduces compressor 

cycling and longer compressor life with lower energy consumption. 
Control system uses adaptive defrost to assure evaporator coil is free 

of ice and is operating at optimum efficiency. Evaporator condensate 

is eliminated using an energy efficient hot gas system.
Electrical: Standard electrical connections shall be 115V, 60 Hz single 

phase. A 10’ cord and plug is supplied and attached to a junction box 

mounted on the exterior top of the cabinet.

Specifications

Standard Features

Options & 
Accessories

Stainless steel interior and exterior (SS)
Stainless steel exterior, aluminum interior (SA)
Aluminum interior and exterior, stainless front (SM)
Built in door locks with heavy duty strikes
Recessed metal door handle
Pressure relief valve is standard to prevent door 
vapor lock
Exterior digital thermometer with high/low 
temperature alarm
Easy to use electronic control
Easy access “flip up” shroud
Three wire shelves per section - SA/SS standard with 
chrome plated shelves and SM standard with epoxy 
coated shelves
Tough ABS interior door liners
10’ attached cord and plug
6” adjustable stainless steel legs
Stainless steel breaker strips
High density foamed in place environmentally 
friendly, Kyoto Protocol Compliant, Non ODP (Ozone 
Depletion Potential), Non GWP (Global Warming 
Potential) polyurethane keeps energy costs low
Energy savings door heater switch
Two year parts & labor warranty
Five year compressor warranty

•
•
•
•
•
•

•

•
•
•

•
•
•
•
•

•
•
•

One section 

Two section

SSF1N-S 

SSF2N-S 

Stainless exterior and interior full door

SSF1N-SH 

SSF2N-SH 

Stainless exterior and interior half door

SAF1N-S 

SAF2N-S 

Stainless exterior and aluminum interior full door

SAF1N-SH 

SAF2N-SH 

Stainless exterior and aluminum interior half door

SMF1N-S 

SMF2N-S 

Stainless front aluminum exterior and interior full door

SMF1N-SH 

SMF2N-SH 

Stainless front aluminum exterior and interior half door

Models

Specification Line®

Self-Contained Solid Door Narrow Reach-In Freezer

Sp

ec

ifi

ca

tio

n L

in

e®

: S

olid

 D

oo

r N

arr

ow
 R

ea

ch

-In

 Fr

ee

ze

r

Security (prison) package
6” polyurethane casters
Door field rehingability
Stainless steel interior door liner
Additional shelves
Tray slides
Stainless steel back
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
4” stainless steel utility base
230-50-1 electrical
220-60-1 electrical

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•