Blomberg DSM 9651 A+ Benutzerhandbuch

Seite von 93
EN
10
Replacing the interior light 
bulb 
Should the light fail to work, proceed 
as follows.
1- Switch off at the socket outlet and 
pull out the mains plug.
You may find it useful to remove 
shelves for easy access.
2- Use a flat tipped screwdriver to 
remove the light diffuser cover.
3- First check that the bulb hasn’t 
worked loose by ensuring it is screwed 
securely in the holder. Replace the 
plug and switch on.
If the bulb works, replace the light 
Before disposing of your refrigerator, 
cut out the electric plug and, if there 
are any locks on the door, make them 
inoperable in order to protect children 
against any danger.
Adjusting the legs
If your refrigerator is unbalanced;
You can balance your refrigerator by 
turning the front legs of it as illustrated 
in the figure. The corner where the 
leg exists is lowered when you turn 
in the direction of black arrow and 
raised when you turn in the opposite 
direction. Taking help from someone to 
slightly lift the refrigerator will facilitate 
this process.
cover by inserting the rear lug and 
pushing up to locate the front two 
lugs.
4- If the light still fails to work, switch 
off at the socket outlet and pull out 
the mains plug. Replace the bulb with 
a new 15 watt (max) screw cap (SES) 
bulb.
5- Carefully dispose of the burnt-out 
light bulb immediately.
Replacement light bulb can easily be 
obtained from a good local electrical or 
DIY store.