Whirlpool GMC305 Benutzerhandbuch
6
ELECTRONIC OVEN CONTROL
Display
When power is first supplied to the appliance, “PF” will appear on
the display. Press OFF/CANCEL to clear.
the display. Press OFF/CANCEL to clear.
Any other time “PF” appears, a power failure has occurred. Press
OFF/CANCEL and reset the Clock if needed.
OFF/CANCEL and reset the Clock if needed.
When the oven is in use, the display shows preheat time and the
temperature and oven setting.
temperature and oven setting.
When the oven is not in use, the display shows the time of day.
When using COOK TIME (on some models), the display will show
either hours and minutes, or minutes and seconds.
either hours and minutes, or minutes and seconds.
Start/Enter
The START/ENTER pad begins any oven function except the
Timer. If not pressed within 5 seconds after pressing a function
pad, the “START?” indicator light will flash as a reminder. On
some models, “START?” will appear on the display.
Timer. If not pressed within 5 seconds after pressing a function
pad, the “START?” indicator light will flash as a reminder. On
some models, “START?” will appear on the display.
If not pressed within 4 to 5 minutes (depending on your model)
after pressing a function pad, the oven display will return to the
time of day mode and the programmed function will be
cancelled.
after pressing a function pad, the oven display will return to the
time of day mode and the programmed function will be
cancelled.
Off/Cancel
The OFF pad stops any function except the Clock, Timer and
Control Lock.
Control Lock.
Clock
This is a 12 hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the oven, Timer and Timed Cooking
are off.
are off.
1.
Press CLOCK.
2.
Press the HR or MIN “up” or “down” arrow pads to set the
time of day.
time of day.
3.
Press CLOCK or START/ENTER.
To Disable:
The clock time can be disabled so that it does not show on the
display. To disable, press and hold CLOCK for 5 seconds. To
display the clock time again, press and hold CLOCK for 5
seconds and the time of day will show on the display. The clock
time should not have to be reset.
display. To disable, press and hold CLOCK for 5 seconds. To
display the clock time again, press and hold CLOCK for 5
seconds and the time of day will show on the display. The clock
time should not have to be reset.
Tones
Tones are audible signals, indicating the following:
One tone
■
Valid pad press
■
Oven is preheated
■
Function has been entered
Three tones
■
Invalid pad press
Four tones
■
End-of-cycle
■
Reminder, repeating each minute after the end-of-cycle tones
1.
Oven Setting Pads
2.
Temperature Pad
3.
Timer Set and Off
4.
Electronic Display
5.
Microwave Oven Controls
6.
Electronic Clock Control
Pad
Pad
7.
Hour Pad
8.
Minute Pad
9.
Clock Pad
10.
Light Pad
11.
Off/Cancel Pad
12.
Start/Enter Pad
TEMP
AUTO
CLEAN
CUSTOM
BROIL
BAKE
COOK
TIME
DELAY
START
START
TIME
STOP
TIME
HR
MIN
TIMER
SET
CLOCK
TIMER
OFF
LIGHT
START
ENTER
OFF
CANCEL
LOWER OVEN
F
C
CONVECT
HEAT
DELAY
TIMED BROIL
BAKE
ON
START ?
TIMER
DOOR LOCKED
COOK
STOP
CLEAN
TIME
MICROWAVE OVEN
START
7
8
9
0
6
5
4
1
2
3
OFF
DEFROST
POPCORN
(3 SIZES)
REHEAT
MICRO
TIME
AUTO
COOK
WARM
HOLD
COOK A
BIT MORE
COOK
POWER
ADD
MINUTE
CRISP
QUANTITY
ENTER
CANCEL
BROIL
MEMORY
1
2
3
4
5
6
7
8
9
10
11
12