Insys MoRoS ISDN 1.1.1 11-02-06-02-01.005 Benutzerhandbuch
Produktcode
11-02-06-02-01.005
MoRoS Modem/ISDN
Functions
June 06
23
The country-specific settings of the modem are loaded in the field “Country code”. Use
the list box to select the required country. The country code is displayed in brackets
behind the country name. The country code may be identical for several countries.
the list box to select the required country. The country code is displayed in brackets
behind the country name. The country code may be identical for several countries.
The radio button “Wait for Dialtone” can be set to “Yes” if the modem should wait for a
dial tone before it initiates an outgoing call. It may be necessary to set this setting to
“No”, if the MoRoS is connected to a phone system. It is usually necessary to enter “0” as
dialing code when entering the phone number. Further information about this topic can
be found under "Dial-Out" (Chapter 6.6).
dial tone before it initiates an outgoing call. It may be necessary to set this setting to
“No”, if the MoRoS is connected to a phone system. It is usually necessary to enter “0” as
dialing code when entering the phone number. Further information about this topic can
be found under "Dial-Out" (Chapter 6.6).
When changing the country code, all standard values for this country setting
are automatically loaded, e.g. “Wait for dial tone” is reset to “No”.
AT commands may be entered in the field “Terminal”. This command is sent directly to
the analogue modem of the MoRoS. The reply of the modem is displayed below the entry
field.
the analogue modem of the MoRoS. The reply of the modem is displayed below the entry
field.
6.5 Dial-In
This setting activates the function “Dial-In”. All other settings are ignored if “No” is
selected at this point.
selected at this point.