Insys MoRoS ISDN 1.1.1 11-02-06-02-01.005 Benutzerhandbuch

Produktcode
11-02-06-02-01.005
Seite von 46
MoRoS Modem/ISDN 
FAQ 
June 06 
39 
only try to call this number after 2 hours. The status “blacklisted” can also be 
deleted by performing a hard reset (pressing the reset key more than 3 seconds). 
 
No connection between the MoRoS Modem and the MoRoS ISDN can be established. 
This is not an error! A connection between analogue connections and ISDN connections 
is in general not possible anyways. 
 
A connection to a remote LAN could be established, but a communication with a computer 
in the remote LAN is not possible. 
Possible causes: 
¾
  The gateway address of the local computer is wrong. 
¾
  The DNS resolution is incorrect. This can be checked by using IP addresses instead 
of domain names for the communication. 
A communication between a local computer and a computer from  a remote LAN cannot 
be established if all IP addresses are located in the same network. The PPP connection 
consists of the two IP addresses of the PPP client and the PPP server. These two addresses 
form their own network. This PPP network may also not be the same as the network LAN 
1 or LAN 2.  
A model distribution of IP addresses in networks with the sub network masks 
255.255.255.0: