Whirlpool GGE350LWB Benutzerhandbuch
9
ELECTRONIC OVEN CONTROLS
Display
When power is first supplied to the appliance, a flashing time will
appear on the display. See “Clock” section to set time of day.
appear on the display. See “Clock” section to set time of day.
If a flashing time appears at any other time, a power failure has
occurred. Press CANCEL and reset the clock if needed.
occurred. Press CANCEL and reset the clock if needed.
When the oven is not in use, the display shows the time of day.
Cancel
The Cancel pad stops any function except the Clock, Timer, and
Control Lock.
Control Lock.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
format. The clock is set at the factory for the 12-hour format.
To change the clock to 24-hour format:
1. Press and hold the upper oven CANCEL pad and FAVORITE
pad for 3 seconds. “12 Hr” will flash in the display.
2. Press PRESETS to select “24 Hr”; press again to select
“12 Hr.”
3. Set the time of day by following the “To Set” instructions.
To Set:
Before setting, make sure the oven and Timer are off.
1. Press CLOCK. The time of day and colon flash in the display.
2. Press the number pads to set the time of day.
3. Press CLOCK again or wait 4 seconds. The colon will remain
on.
To recall the time of day when another time function is showing,
press CLOCK.
press CLOCK.
To Cancel:
Press and hold upper oven CANCEL and CLOCK for 3 seconds.
The time of day will disappear from the display.
The time of day will disappear from the display.
When the clock display is canceled, press CLOCK to briefly
display the time of day.
display the time of day.
To Restore:
Press and hold upper oven CANCEL and CLOCK for 3 seconds.
The time of day will reappear from the display.
The time of day will reappear from the display.
Range Lights
Oven Lights
While the oven door is closed, press UPPER or LOWER OVEN
LIGHT to turn the light on and off. The oven light will come on
when the oven door is opened. The oven light will not come on
during the Self-Clean cycle.
LIGHT to turn the light on and off. The oven light will come on
when the oven door is opened. The oven light will not come on
during the Self-Clean cycle.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One tone
■
Valid pad press
■
Oven is preheating (long tone)
■
Function has been entered
Two tones
■
Invalid pad press
Four tones
■
End of cycle
A. Upper oven settings
B. Oven display
B. Oven display
C. Upper oven cancel
D. Upper oven light
D. Upper oven light
E. Number pads
F. Lower oven settings
G. Timer 1
H. Timer 2
H. Timer 2
I. Clock
J. Cook & Hold
K. Delay
L. Warm zone
M. Lower oven cance
N. Lower oven light
O. Favorites
P. Presets
K
L
M
N
O
J
E
F
G
A
B
C
D
H
I
P