Tricity Bendix MDB700 Benutzerhandbuch

27

Before calling an Engineer please carry out the
following checks, you may be able to solve the
problem without the expense of an Engineer.

If our Service Engineer finds that the problem is
listed below you will be charged for the call whether
or not the appliance is under guarantee.

* Check that the appliance has been wired in

and is switched on at the wall.

* Check that the main appliance fuse is

working.

If you have checked the above:

* Switch OFF the appliance at the wall and

allow the appliance to cool for a couple of
hours.  Switch ON again.  The appliance
should now be working normally.

* Check that the grill control is in the OFF

position.

* Switch OFF at the wall and allow the

appliance to cool. Check that the oven is
now working normally.

* Leave the oven to cool for a couple of hours.

Check that the grill is now operating
normally.  Ensure that the door is left open
during grilling.

* If the cooling fan fails the grill will not work

correctly.  Contact your local Service Force
Centre.

The oven temperature is too high or too low:

* Check that the recommended temperatures

are being used (see page 21).  Be prepared
to adjust the temperature up or down by
10°C to achieve the results you want.

* Care should be taken if using an oven

thermometer to check oven temperatures as
they may be inaccurate.

The following factors should be considered.

* Ensure you purchase an accurate good

quality instrument.

* Ovens will cycle about a set temperature and

will not be constant.

* Check that the appliance is correctly

installed and that it is level.

* Check that the recommended temperatures

and shelf positions are being used.

* Check that the oven is level.

* Check that bakeware and shelves are not

vibrating in contact with the back panel in the
oven.