Amana AOCS3040 Benutzerhandbuch

9

This procedure should be performed by 2 people.
1.

Seal Openings in wall behind the oven or on floor
under oven. Holes must be sealed before sliding oven
into position.

2.

Lift wall oven and slide into cutout.

3.

Secure wall oven to cabinet with 4 screws.

Place Oven in Wall

1.

Disconnect power to oven at circuit breaker or fuse
panel.

2.

Remove screws securing oven to wall.

3.

Remove oven and place oven aside.

4.

Disconnect electrical conduit.

5.

To reinstall oven, follow instructions in 

Installation

section of this manual.

Control panel can be adjusted to tilt from 0° to 12° to
make more visible.
1.

Loosen screws on top, and sides of control panel and
pivot screw on bottom, sides of control panel before
installing oven, or while oven partially pulled from
opening.

2.

Adjust control panel to desired angle and retighten
screws.

Loosen screw

0° tilt

12° tilt

Pivot screw

Tilt Control Panel