Frigidaire 318200138 (0610) Benutzerhandbuch

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

The 

 pad is used to set the clock. The clock may be set for 12 or 24 hour time of

day operation. The clock has been preset at the factory for the 12 hour operation.
When the wall oven is first plugged in, or when the power supply to the appliance has
been interrupted, the timer in the display will flash along with "PF" (power failure, See
Fig. 1).

When PF appears in the display and 12:00 is flashing, press 

.

 A beep will sound

and  PF will disappear.

1.

Press 

. "CLO" and the current time of day will

appear in the display (Fig. 2).

2.

Press 

 

 

 pads to set the time of day to 1:30

(Fig. 3). Press 

. The time of day will appear in

the display (Fig. 4).

1.

Press and hold 

 for 6 seconds. "CLO" and the

current time of day will appear in the display (Fig. 3). A
beep will sound and "12h" (Fig. 5) or "24h" (Fig. 6) will
appear in the display.

2.

Press 

 to switch between the 12 and 24 hour time

of day display. The display will show either "12h" (Fig.
5) or "24h" (Fig. 6).

3.

Press 

 to accept the change or press 

 to

reject the change.

4.

Reset the correct time as described in To set the
Clock above. Please note that if the 24 hour time of
day mode was chosen, the clock will now display time
from 0:00 through 23:59 hours.

 

 

 

 for 6 seconds

 or