Dacor MOV Benutzerhandbuch

Planning the Installation

Cabinet Cutout (Continued)

Support Platform

The top surface of the support platform must be installed 

flush with the cutout in the front of the cabinet or wall 

and any trim. Failure to install the platform properly 

may cause the exhaust vent to deform and/or become 

obstructed. An obstructed exhaust area may cause the 

oven to malfunction. See below.

Provide a platform within the cabinet to support the oven. A 

properly supported piece of 3/4” (1.9 cm) thick plywood is 

recommended.
All contact surfaces between the appliance and the cabi-

net, including the support platform, must be sturdy, straight 

and level. The oven cannot be leveled after it has been 

installed.

 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

Oven door

Cool air intake 

(do not block)

Exhaust vent 

(do not block)

Sheet metal on 

bottom of oven

Deformed sheet metal 

blocking vent

Cabinet front or wall

Support platform

Exhaust deflector 

(do not bend)