Dacor ECS130 Benutzerhandbuch

nsTallaTion

nsTRuCTions

Due to the weight of this appliance, removing the door(s) will

significantly reduce the lifting load, while also providing the

installer with a place to grip the oven when lifting it into place.

Open the door to its fully opened position. Rotate the catch over

the retaining arm on each hinge. Lift the oven door to about a 30˚

angle from the horizontal. Pull the door away from the oven while

continuing to lift.

emoving

The

ven

ooRs

TIM

Hinge Catch

Lift door up to 30° angle, then

pull the door away from the oven.

To remove door, rotate

catch up.

30°

WARNING

1. Do not attempt to disengage the hinge catches with the

door removed from the oven. The hinge springs could

release, causing personal injury.

2. Do not lift or carry oven door by the door handle

Dacor

Model Number

Max. 208V

Connected Load

Max. 240V

Connected Load

Power

Supply

ECS127

25 Amps

(5.2kW)

22 Amps

(5.2kW)

208/240V

4-wire

60Hz, 30A

MCS127

ECS130
PCS130

MCS130

ECS136

n/a

29 Amps

(7.0kW)

208/240V,

4-wire,

60Hz, 40A

ECS227

39 Amps

(8.1kW)

34 Amps

(8.1kW)

MCS227

ECD227

MCD227

ECS230
PCS230

MCS230

ECD230
PCD230

MCD230

Electrical Requirements

NOTE:

The four (4) leads supplied with

this appliance are UL recognized

for connection to larger gauge

household wiring. The insulation

of these leads is rated at

temperatures much higher

than the temperature rating of

household wiring. The current-

carrying capacity of the conductor

is governed by the temperature

rating of the insulation around the

wire, rather than the wire gauge

alone.

Door Removal