Middleby Cooking Systems Group PS520E Benutzerhandbuch

11

SECTION 3

OPERATION

E. Conveyor
The on-off switch for the conveyor motor is on the
digital control panel. Also on the control panel is the
digital conveyor speed control. The digital control can
be adjusted from 1-10 minutes bake time (conveyor
speed). Refer to Figure 3-3.

Conveyor speed is measured by the amount of time it
takes for an item to go through the bake chamber of
the oven.

To check conveyor speed, place a product item at the
entrance end of the baking chamber as shown. Time
how long it takes for the leading edge of the item to go
from the entrance end of the baking chamber to the
exit end. This should be the conveyor speed shown on
the conveyor speed digital control.

NOTE: In Figure 3-4 and 3-5, the oven shown is with
the conveyor running left to right.

A possibility of injury from rotating parts and electric

shock exists in the oven. Never disassemble or

clean the oven with the BLOWER switch or any

other oven control turned “ON” or “I”. Turn “OFF” or

“O” and lockout or tagout all electric power to the

oven before attempting to clean or service the oven.

Minutes

Seconds