Frigidaire 242292000 Benutzeranleitung

27

Visit our web site at

1-800-944-9044 (United States)

1-800-265-8352 (Canada)

•  Ice maker power switch is Off.
•  Ice maker has small cube 

caught in mechanism.

•  Saddle valve on cold water 

pipe is clogged or restricted 

by foreign material.

•  Turn power switch to On (“I”) position.
•  Remove small cube from ice maker. The ice and water 

filter cartridge may be clogged. Replace filter cartridge.

•  Turn off household water line valve. Remove valve. 

Ensure that valve is not a self-piercing saddle valve. 

Clean valve. Replace valve if necessary.

•  Ice maker is producing less 

ice than you expect.

•  Check to see if water 

dispenser is dispensing 

slower than normal.

•  Freezer control is set too 

warm (freezer ice maker).

•  The ice maker produces approximately four pounds 

of ice every 24 hours depending on usage conditions.

•  If it is, replace the ice and water filter cartridge. 

 

•  Set freezer control to colder setting to improve 

performance of the ice maker (freezer ice maker). 

Allow 24 hours for temperature to stabilize.

•  Ice maker wire signal arm 

is being held down by some 

item in the freezer.

•  Move item and release wire signal arm. Remove 

any ice cubes that are frozen together over the wire 

signal arm.

•  Ice cubes are not being 

used frequently enough.

•  Ice cubes are hollow 

(partially frozen cubes with 

water inside).

•  Freezer control is set  

too warm.

•  Remove ice container and discard ice from container. 

Ice maker will produce fresh supply.

•  The ice and water filter cartridge may be clogged.

Replace filter cartridge. 

•  Set freezer control to colder setting. Allow 24 hours 

for temperature to stabilize.

•  Door was closed too hard, 

causing other door to  

open slightly.

•  Refrigerator is not level. 

It rocks on the floor when

moved slightly.

•  Refrigerator is touching a 

wall or cabinet.

•  Close both doors gently. 

 

•  Ensure floor is level and solid, and can adequately

support the refrigerator. Contact a carpenter to 

correct a sagging or sloping floor.

•  Ensure floor is level and solid, and can adequately

support the refrigerator. Contact a carpenter to 

correct a sagging or sloping floor.

•  Food is touching shelf on 

top of drawer.

•  Track that drawers slide on 

is dirty.

•  Remove top layer of items in drawer. 

•  Ensure drawer is properly installed on track.
•  Clean drawer, rollers, and track. See Care & Cleaning.