Frigidaire 242292000 Benutzeranleitung

Seite von 29
5
NOTE
If your refrigerator is placed with the door hinge side 
against a wall, you may have to allow additional space 
so the door can be opened wider.
INSTALLATION
CAUTION
Do Not install the refrigerator where the temperature 
will drop below 55°F (13°C) or rise above 110°F 
(43°C). The compressor will not be able to maintain 
proper temperatures inside the refrigerator.
Do Not block the toe grille on the lower front of your 
refrigerator. Sufficient air circulation is essential for the
proper operation of your refrigerator.
This Use & Care Guide provides general installation and 
operating instructions for your model. We recommend 
using a service or kitchen contracting professional to 
install your refrigerator. Use the refrigerator only as 
instructed in this Use & Care Guide. Before starting the 
refrigerator, follow these important first steps.
Location
•  Choose a place that is near a grounded, non-GFCI, 
electrical outlet. Do Not use an extension cord or an 
adapter plug.
•  If possible, place the refrigerator out of direct 
sunlight and away from the range, dishwasher, or 
other heat sources.
•  The refrigerator must be installed on a floor that is level
and strong enough to support a fully loaded refrigerator.
•  Consider water supply availability for models 
equipped with an automatic ice maker.
Installation
•  Allow the following clearances for ease of installation, proper 
air circulation, and plumbing and electrical connections:
 
Sides & Top 
3
/
8
 inch (9.5 mm)
 
Back   
1 inch (25.4 mm)
Door opening
Your refrigerator should be positioned to allow easy 
access to a counter when removing food. For best use of 
refrigerator drawers and freezer baskets, the refrigerator 
should be in a position where both can be fully opened.
Phillips™
Head or
#2 Square Drive
Head
(OR)
AND
OR
Socket
Wrench Set
Adjustable
Wrench
OR
Tools Necessary:
3/8" Fixed
Wrench
Top Hinge
Cover Front
Screw
Top Hinge
Cover Rear
Screw
Lower
Hinge
Screw
Top
Hinge
Screw
Components Provided:
Required Tools
You will need the following tools: