Manitowoc Ice K00221 Merkblatt

 

1.  Lubricate the female fittings with refrigerant oil and install the assembly of the quick-connect fittings on the MAC-X 

condensing unit. 

2.  The metal enclosure attaches to the MAC-X condensing unit with three screws from the unit, two screws on top and 

one screw at the bottom.  Mark and drill three 5/32” diameter holes. 

3.  The remote tubing line set attaches to the male fittings provided on the headmaster kit.  Refrigerant oil must be used 

to lubricate the fittings. 

4.  Leak check all joints. 
5.  Place the four labels, 8136193, included, as follows:  two on the ice machine (one by each serial plate), one, as shown 

below, and one at the discretion of the installer. 

6.  ATTENTION INSTALLER:  Add the following refrigerant at the time of installation: 

Q-0600 Series - add four (4) pounds 

 

S-0500 Series - will not function with MAC unit 

Q-0800 Series - add four (4) pounds 

 

S-0600 Series - add four (4) pounds 

Q-1000 Series - add two (2) pounds 

 

S-0800 Series - add four (4) pounds 

Q-1300 Series - Add nothing 

 

 

S-1000 Series - add four (4) pounds 

      S-1400 

Series 

- 

add 

two 

(2) 

pounds 

      S-1600 

Series 

- 

add 

two 

(2) 

pounds 

      S-1800 

Series 

- 

add 

two 

(2) 

pounds 

 

 

Manitowoc Ice, Inc. 

2110 South 26

th

 Street, P.O. Box 1720, Manitowoc, WI  54221-1720 USA                                                                                                                                       

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879                                               8014013                   
Web Site - www.manitowocice.com                                                                                                                                                     Rev. 11/27/06 

Note 2 

Note 1 

Note 5 

Note 3