Panasonic HDC-HS9EG-S Silver HDC-HS9EB-S Benutzerhandbuch
Produktcode
HDC-HS9EB-S
103
VQT1N87
Setup
2
Connection and recognition
After the software applications are installed, this unit must be connected to the PC and be correctly
recognised by the PC.
≥ Remove the supplied CD-ROM from your PC.
recognised by the PC.
≥ Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
1
Connect this unit to the AC
adaptor.
adaptor.
≥ If a battery is used, operation is not possible
when this unit is connected to a PC.
2
Turn on the unit.
≥ This function is available in all modes.
3
Connect this unit to a PC.
≥ Insert the USB connectors as far as they will go.
≥ Do not use any other USB connection cables
≥ Do not use any other USB connection cables
except the supplied one. (Operation is not
guaranteed with any other USB cables.)
guaranteed with any other USB cables.)
4
Select [PC CONNECT] and press
the cursor button.
the cursor button.
≥ This unit is automatically detected by the PC.
≥ When the unit is connected to a PC, the
operation mode cannot be changed and its
power cannot be turned off.
Disconnect the USB cable, before turning
this unit off.
power cannot be turned off.
Disconnect the USB cable, before turning
this unit off.
≥ Do not disconnect the USB cable or the AC
adaptor while the card access lamp is on or
card access icon (
card access icon (
) appears on the LCD
monitor. Doing so may damage the data.
≥ Do not disconnect the USB cable or the AC
adaptor while the HDD access lamp is on or
HDD access icon (
HDD access icon (
) appears on the LCD
monitor. Doing so may damage the data.
∫ If the driver has not been
recognised properly
Use the following methods to enable it to be
recognised.
Method 1:
Turn off the unit and your PC once and try
verifying again.
Method 2:
Remove the SD card and try verifying again.
Method 3:
Try connecting the unit to another USB port on
your PC.
recognised.
Method 1:
Turn off the unit and your PC once and try
verifying again.
Method 2:
Remove the SD card and try verifying again.
Method 3:
Try connecting the unit to another USB port on
your PC.
∫ To disconnect USB cable safely
1
Double click the
(
) icon in task
tray displayed on the PC.
≥ Depending on your PC’s settings, this icon
may not be displayed.
2
Select [USB Mass Storage Device] and
click [Stop].
click [Stop].
3
Verify [MATSHITA HDC-HS9/HDD USB
Device] or [MATSHITA HDC-HS9/SD USB
Device] is selected and click [OK].
Device] or [MATSHITA HDC-HS9/SD USB
Device] is selected and click [OK].
HDCHS9EP-VQT1N87_eng.book 103 ページ 2008年1月11日 金曜日 午後7時52分