Cecilware EL-1624T Benutzerhandbuch

 

4

 

 
*A Cecilware Recommended Qualified Service Technician should carry out repairs if necessary. Do not 
remove any components or service panels on this product. 
 
*Switch off power to and disconnect from the power source while cleaning. 
 
*Allow the Griddle/Cheesemelter to cool down after using before dismantling for cleaning; the unit will still 
be too hot to handle immediately after use 

. 

*Do not immerse in water or use hose to clean. 
     

*If the power cord is damaged, it must be replaced by a Cecilware Recommended Qualified Service 

Technician in order to avoid a hazard. 

If your Cecilware Griddle/Cheesemelter does not operate, please check the following before placing a 
service call. 
 

1.  Mains power supply 

1.  Check mains power supply 

2.  Power switch has not 

been turned on 

2.  Check the unit is correctly plugged in 

and turned on 

3.  Fuse in the plug has 

blown 

3.  Replace the fuse in the plug with 

correctly rated fuse 

4.  Plug and lead are 

damaged 

4.  Call service agent or qualified 

technician 

5.  Internal wiring fault 

5.  Call service agent or qualified 

technician 

The unit is not working and the 

indicator light is not on 

6.  Thermal cut-out has 

activated 

6.  This is a safety device that has 

disconnected the power: call a service 

agent or qualified technician 

The unit is heating but the 

indicator light is not on 

1. The indicator bulb has 

blown 

1. Replace the indicator light: call a 

service agent or qualified technician