Insys GPRS 4.2 11-02-01-03-10.008 Benutzerhandbuch
Produktcode
11-02-01-03-10.008
24
Manual Supplement Insys GSM/GPRS 4.0
Version 1.0 / 07.03
All connections (channels) have to be opened by the GPRS device.
Please refer to your provider, whether a VPN (Virtual Private Network) is
available for this functionality, which allows at least the access from a verified
address out of this VPN.
Please refer to your provider, whether a VPN (Virtual Private Network) is
available for this functionality, which allows at least the access from a verified
address out of this VPN.
3.2 Modem Compatible GPRS Connection Set-Up
3.2.1 Presetting
The device has to be logged in to the GSM network before a GPRS attach. For
this, the INSYS GSM/GPRS 4.0 provides the possibility to store the PIN of the SIM
this, the INSYS GSM/GPRS 4.0 provides the possibility to store the PIN of the SIM
card permanently that the device is able to log in to the GSM network
automatically for every restart.
The command AT**PIN is available for this. Please refer to the user’s manual of
the INSYS GSM 4.0 for more detailed information about this.
Entering the PDP context with the APN of the GPRS provider is also required:
automatically for every restart.
The command AT**PIN is available for this. Please refer to the user’s manual of
the INSYS GSM 4.0 for more detailed information about this.
Entering the PDP context with the APN of the GPRS provider is also required:
AT+CGDCONT=1,IP,<APN-Address>
The <APN-Address> for Vodafone (D2) is e.g.: VOLUME.D2GPRS.DE
More providers can be found ion the table under “General ! Requirements !
GPRS”.
Basically it is possible to define different PDP contexts, this one here is stored as
context “1”.
Attention: The PDP context cannot be stored. It has to be re-defined after each
restart of the device.
Note:
Using AT commands it is also possible to request a specific QoS profile (Quality
of Service) from the provider at connection set-up (AT+CGQREQ) or to define a
minimum profile (AT+CGQMIN). The QoS has to be at least above it that the
The <APN-Address> for Vodafone (D2) is e.g.: VOLUME.D2GPRS.DE
More providers can be found ion the table under “General ! Requirements !
GPRS”.
Basically it is possible to define different PDP contexts, this one here is stored as
context “1”.
Attention: The PDP context cannot be stored. It has to be re-defined after each
restart of the device.
Note:
Using AT commands it is also possible to request a specific QoS profile (Quality
of Service) from the provider at connection set-up (AT+CGQREQ) or to define a
minimum profile (AT+CGQMIN). The QoS has to be at least above it that the
device sets-up a connection.
The QoS profile contains e.g. values like data rate per hour, max. data rate,
The QoS profile contains e.g. values like data rate per hour, max. data rate,
delay times, etc.
Experience has shown that these settings are not successful concerning
performance improvements (when this document has been drawn up).
Experience has shown that these settings are not successful concerning
performance improvements (when this document has been drawn up).