Dometic 4806 Benutzerhandbuch

14

4800 SERIES VACUFLUSH TOILETS

REMOVING TOILET FROM FLOOR

1.  Turn off water and electrical power to  

toilet.

2.  Remove water inlet hose from toilet.
3.  Remove toilet from floor and turn it upside down. 

MAKE SURE POWER WIRES REMAIN SECURE.

TO CORRECT PROBLEMS 6b, 9a and 12c:
4.  Loosen cam switch mounting screws with 3/32-

inch hex tool and 1/4-inch box-end wrench. Slide 

cam switch up or down (see illustrations below) 

depending on flush ball position.

5.  Tighten cam switch mounting screws, apply 

electrical power and check adjustment. Repeat as 

necessary.

6.  After cam switch and flush ball are properly  

positioned, connect water line and reinstall toilet.

alignment
The flush ball should be properly positioned so that 

the “A” and “B” distances are equal (see illustration at 

right). If the flush ball becomes misaligned (resulting in 

water leaking from bowl or other flushing problems), 

follow instructions below to resolve problem.