Dacor MRWD30 Benutzerhandbuch

Verifying the Package Contents

•  (3) mounting screws - PN 83569
•  Wire rack with mounting hardware (OWD24 only) 

(1) PN 83619 (screw), (1) PN 83267 (clamp)

Installation Planning

•  A qualified technician must complete the installation of this built-

in appliance. Proper installation is the customer's responsibility.

•  Carefully check the location where the drawer is to be installed. 

The drawer should be placed for convenient access. Make 

certain that electrical power can be provided in the selected 

location. Install the warming drawer in wood cabinets only.

•  Plan the installation so that all minimum clearances are met or 

exceeded. Dimensions shown provide minimum clearances, 

unless otherwise noted. Be certain that proper clearance is 

provided for the drawer when it is in the open position.

•  The specified minimum cabinet depth and width must be 

provided. The cabinet depth and width must completely enclose 

the recessed portion of the drawer.

•  Cabinet cutout dimensions must be used as indicated. All 

contact surfaces between the appliance and the cabinet must 

be solid and level. The drawer support platform must be flush 

with the bottom edge of the cabinet cutout.

•  Make certain that you have everything necessary to ensure a 

proper installation before proceeding.

Installation Specifications

22 5/16” (56.7 cm) 22 1/4” (56.5 cm) 22 3/8” (56.8 cm)

8 15/16” 

(22.7 cm)

23 3/8” 

(59.4 cm)

23 13/16” 

(60.5 cm)

9 1/16”  

(23.0 cm)

25 5/16” (64.3 cm) 25 1/4” (64.1 cm) 25 3/8” (64.5 cm)

28 5/16” (71.9 cm) 28 1/4” (71.8 cm) 28 3/8” (72.1 cm)

22 1/2” (57.1 cm) 22 1/2” (57.1 cm) 22 1/2” (57.1 cm)

11 7/8” 

(30.2 cm)

20” 

(50.8 cm)

18” 

(45.7 cm)

11 7/8” 

(30.2 cm)

40" (101.6 cm)

3 prong

120 Vac power cord

Chassis without

drawer installed

Mounting hole,

** = OWD24 mounting holes

**

**

**

**

9 places

G

(IWD/OWD Series)

D

A

(IWD/OWD Series)

Chassis

Drawer open

F

E

5/16”

(8 mm)

B

C

See following page for chassis dimensions for other models

•  A custom front panel is required for IWD 

series models and optional for OWD24.

•  An optional Epicure

®

 style front panel kit 

is available for model OWD24.